29 CFR 1910 · General Industry

1910.1029(e)(1): Monitoring program

By Black Belt Safety Editorial Team Official text as of octubre 15, 2026 3 min read

Key takeaways

  • 1910.1029(e)(1) is part of OSHA's general industry standards (29 CFR Part 1910).
  • Related part: 1910.1029(e)(1)(iii).
  • Free 5-minute toolbox talk for your crew below.
In this article
  1. What this rule covers
  2. Official text
  3. Free toolbox talk
  4. OSHA interpretation letters
  5. Related parts of this rule
  6. Get your crew competent
  7. About this page

What this rule covers

29 CFR 1910.1029(e)(1) ("Monitoring program") is one requirement inside 1910.1029 Coke oven emissions, an OSHA general industry standard (Part 1910). It includes 4 sub-paragraphs. The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(1) Monitoring program.

(i) Each employer who has a place of employment where coke oven emissions are present shall monitor employees employed in the regulated area to measure their exposure to coke oven emissions.

(ii) The employer shall obtain measurements which are representative of each employee's exposure to coke oven emissions over an eight-hour period. All measurements shall determine exposure without regard to the use of respiratory protection.

(iii) The employer shall collect fullshift (for at least seven continuous hours) personal samples, including at least one sample during each shift for each battery and each job classification within the regulated areas including at least the following job classifications: Open (e)(1)(iii)

(a) Lidman;

(b) Tar chaser;

(c) Larry car operator;

(d) Luterman;

(e) Machine operator, coke side;

(f) Benchman, coke side;

(g) Benchman, pusher side;

(h) Heater;

(i) Quenching car operator;

(j) Pusher machine operator;

(k) Screening station operator;

(l) Wharfman;

(m) Oven patcher;

(n) Oven repairman;

(o) Spellman; and

(p) Maintenance personnel.

(iv) The employer shall repeat the monitoring and measurements required by this paragraph (e)(1) at least every three months.

Source: eCFR, text current as of 2026-10-15. Read all of 1910.1029.

Free toolbox talk

A 5-minute crew talk on 1910.1029(e)(1), plus alerts when this rule changes. Free.




OSHA interpretation letters

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Desplácese hacia arriba