29 CFR 1910 · General Industry

1910.1030(d)(4)(ii)(A): Disinfecting Contaminated Work Surfaces

By Black Belt Safety Editorial Team Official text as of octubre 15, 2026 Data updated octubre 20, 2026 3 min read

In plain words:

Contaminated work surfaces must be cleaned with a suitable disinfectant after procedures are done, immediately or as soon as feasible when overtly contaminated or after any blood or OPIM spill, and at the end of the shift if they may have been contaminated since the last cleaning.

Key takeaways

  • 1910.1030(d)(4)(ii)(A) is part of OSHA's general industry standards (29 CFR Part 1910).
  • OSHA cited it 12 times in the last 3 years, in 12 inspections, with $15,110 in current penalties.
  • Most citations: TN (5), CT (4), NC (1).
  • Related part: 1910.1030(d) Methods of compliance (455 citations).
  • Free 5-minute toolbox talk for your crew below.
12citations, 3 years
$15,110current penalties
12inspections
0linked injury cases
In this article
  1. What this rule covers
  2. Official text
  3. Where and how often it was cited
  4. Free toolbox talk
  5. OSHA interpretation letters
  6. Related parts of this rule
  7. Get your crew competent
  8. Frequently asked questions
  9. About this page

What this rule covers

29 CFR 1910.1030(d)(4)(ii)(A) is one requirement inside 1910.1030 Bloodborne pathogens, an OSHA general industry standard (Part 1910). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(A) Contaminated work surfaces shall be decontaminated with an appropriate disinfectant after completion of procedures; immediately or as soon as feasible when surfaces are overtly contaminated or after any spill of blood or other potentially infectious materials; and at the end of the work shift if the surface may have become contaminated since the last cleaning. 12 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.1030.

Where and how often it was cited

YearCitations
20232
20243
20255
20262

Top states: TN (5), CT (4), NC (1), OR (1), NY (1)

Largest penalties

EmployerLocationPenalty for this rule
154910 - STERICYCLE, INC.CONCORD, NC$8,000
VANDERBILT UNIVERSITY MEDICAL CENTERNASHVILLE, TN$2,450
JMCT 13-3 LLCMIDDLETOWN, CT$2,420
ARAMARK HEALTHCARE SUPPORT SERVICES, LLCNASHVILLE, TN$2,240
SM ENFIELD LLCENFIELD, CT$0

Free toolbox talk

A 5-minute crew talk on 1910.1030(d)(4)(ii)(A), plus alerts when this rule changes. Free.




OSHA interpretation letters

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

When must surfaces be disinfected after procedures?

After completion of procedures.

What about spills?

Immediately or as soon as feasible after any spill of blood or other potentially infectious materials.

Is end-of-shift cleaning required?

Yes, if the surface may have become contaminated since the last cleaning.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Desplácese hacia arriba