29 CFR 1910 · General Industry · Subpart H

1910.119(j)(4)(iv): Documenting Equipment Inspections and Tests

By Black Belt Safety Editorial Team Official text as of octubre 15, 2026 Data updated octubre 21, 2026 3 min read

In plain words:

The employer must document each inspection and test done on process equipment. Records must show the date, the name of the person who did it, the serial number or other equipment identifier, a description of the inspection or test, and the results.

Key takeaways

  • 1910.119(j)(4)(iv) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart H).
  • OSHA cited it 20 times in the last 3 years, in 20 inspections, with $57,749 in current penalties.
  • Most citations: TX (4), TN (3), VA (3).
  • Related part: 1910.119(j) Mechanical integrity (227 citations).
  • Free 5-minute toolbox talk for your crew below.
20citations, 3 years
$57,749current penalties
20inspections
0linked injury cases
In this article
  1. What this rule covers
  2. Official text
  3. Where and how often it was cited
  4. Free toolbox talk
  5. OSHA interpretation letters
  6. Related parts of this rule
  7. Get your crew competent
  8. Frequently asked questions
  9. About this page

What this rule covers

29 CFR 1910.119(j)(4)(iv) is one requirement inside 1910.119 Process safety management of highly hazardous chemicals, an OSHA general industry standard (Part 1910, Subpart H). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(iv) The employer shall document each inspection and test that has been performed on process equipment. The documentation shall identify the date of the inspection or test, the name of the person who performed the inspection or test, the serial number or other identifier of the equipment on which the inspection or test was performed, a description of the inspection or test performed, and the results of the inspection or test. 20 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.119.

Where and how often it was cited

YearCitations
20232
20245
20256
20267

Top states: TX (4), TN (3), VA (3), OH (2), OR (2)

Largest penalties

EmployerLocationPenalty for this rule
SCHREIBER FOODS, INC.SHIPPENSBURG, PA$16,550
TROY CHEMICAL CORPORATIONNEWARK, NJ$14,650
TAYLOR FARMS NEW ENGLAND, INC.NORTH KINGSTOWN, RI$12,059
SOUND RESOURCE SOLUTIONSSHEPHERD, TX$8,067
DFA DAIRY BRANDS ICE CREAM, LLCATHENS, TN$5,000

Free toolbox talk

A 5-minute crew talk on 1910.119(j)(4)(iv), plus alerts when this rule changes. Free.




OSHA interpretation letters

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

What must an inspection record include?

The date, the name of the person who performed it, the equipment serial number or identifier, a description of what was done, and the results.

Does every inspection need a record?

Yes. Each inspection and test performed on process equipment must be documented.

Why record the equipment identifier?

So the record ties to the specific equipment that was inspected or tested.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Desplácese hacia arriba