29 CFR 1910 · General Industry · Subpart J

1910.146(d)(10): Entry Permit System

By Black Belt Safety Editorial Team Official text as of octubre 15, 2026 Data updated octubre 20, 2026 3 min read

In plain words:

Employers with permit-required confined spaces must develop and implement a system for preparing, issuing, using and canceling entry permits as required by the standard.

Key takeaways

  • 1910.146(d)(10) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart J).
  • OSHA cited it 17 times in the last 3 years, in 16 inspections, with $105,456 in current penalties.
  • 2 deaths are linked to inspections that cited this rule.
  • Most citations: CT (3), MN (3), KS (2).
  • Related part: 1910.146(d) Permit-required confined space program (480 citations).
  • Free 5-minute toolbox talk for your crew below.
17citations, 3 years
$105,456current penalties
16inspections
2linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Related parts of this rule
  8. Get your crew competent
  9. Frequently asked questions
  10. About this page

What this rule covers

29 CFR 1910.146(d)(10) is one requirement inside 1910.146 Permit-required confined spaces, an OSHA general industry standard (Part 1910, Subpart J). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(10) Develop and implement a system for the preparation, issuance, use, and cancellation of entry permits as required by this section; 17 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.146.

Injuries linked to this rule

2 deaths are linked to inspections where OSHA cited 1910.146(d)(10).

Employee dies after assisting colleague in fine particle col
2024-06-20 · Fatal · RISNER, KY

At 12:00 a.m. on June 20, 2024, an employee became "stuck" in a fine particle collector, a type of hopper. A second employee attempted to assist him. The first employee was able to free himself from the hopper, but the second employeecollapsed and was found…

See all 2 cases

Full case list with employer, penalty, filters and download is part of OSHA Data (Purple Belt).

Unlock with Purple Belt

Where and how often it was cited

YearCitations
20247
20255
20265

Top states: CT (3), MN (3), KS (2), TN (2), TX (2)

Largest penalties

EmployerLocationPenalty for this rule
107323 - WAYNE TRANSPORTS INCVIRGINIA, MN$67,200
HEIDELBERG MATERIALS NORTHEAST LLCNAZARETH, PA$16,550
DEAN EQUIPMENT INC.PORT ARTHUR, TX$10,000
67107 - MOUNTAIN ENTERPRISES INCRISNER, KY$4,900
76933 - PARKER AEROSPACEMONCKS CORNER, SC$3,500

Free toolbox talk

A 5-minute crew talk on 1910.146(d)(10), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1910.146(d)(10).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

What must the permit system cover?

The preparation, issuance, use and cancellation of entry permits.

Is a written system enough?

No. The employer must develop and implement it.

Which standard does this belong to?

The permit-required confined spaces standard, 1910.146.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Desplácese hacia arriba