1910.177(c)(1): Rim Wheel Servicing Training
Employers must provide a program to train all employees who service rim wheels in the hazards and safety procedures. No one may service a rim wheel unless trained in correct procedures for that wheel type and the safe operating procedures in paragraphs (f) and (g). Training must include the rim manual data and the standard, and workers who cannot read the manuals must be taught in a way they understand.
Key takeaways
- 1910.177(c)(1) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart N).
- OSHA cited it 24 times in the last 3 years, in 23 inspections, with $84,421 in current penalties.
- 1 death is linked to inspections that cited this rule.
- Most citations: MD (4), KY (3), WI (2).
- Related part: 1910.177(c) Employee training (42 citations).
- Free 5-minute toolbox talk for your crew below.
In this article
What this rule covers
29 CFR 1910.177(c)(1) is one requirement inside 1910.177 Servicing multi-piece and single piece rim wheels, an OSHA general industry standard (Part 1910, Subpart N). It includes 3 sub-paragraphs. The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.
Official text
(1) The employer shall provide a program to train all employees who service rim wheels in the hazards involved in servicing those rim wheels and the safety procedures to be followed. 24 citations
(i) The employer shall assure that no employee services any rim wheel unless the employee has been trained and instructed in correct procedures of servicing the type of wheel being serviced, and in the safe operating procedures described in paragraphs (f) and (g) of this section. 6 citations
(ii) Information to be used in the training program shall include, at a minimum, the applicable data contained in the charts (rim manuals) and the contents of this standard.
(iii) Where an employer knows or has reason to believe that any of his employees is unable to read and understand the charts or rim manual, the employer shall assure that the employee is instructed concerning the contents of the charts and rim manual in a manner which the employee is able to understand.
Source: eCFR, text current as of 2026-10-15. Read all of 1910.177.
Injuries linked to this rule
1 death is linked to inspections where OSHA cited 1910.177(c)(1).
At 9:20 a.m. on April 16, 2024, an employee working as a mechanic for an tire shop was mounting and balancing six LT225/75R16 BLACKHAWK 10PLY tires on a 2018 Ford E-450 Super Duty Jayco Redhawk Class C motor home. The gross vehicle weightrating (GVWR) is…
Where and how often it was cited
| Year | Citations |
|---|---|
| 2023 | 3 |
| 2024 | 5 |
| 2025 | 11 |
| 2026 | 5 |
Top states: MD (4), KY (3), WI (2), IA (2), TN (2)
Largest penalties
| Employer | Location | Penalty for this rule |
|---|---|---|
| RAIL MODAL GROUP LLC | FREMONT, NE | $14,895 |
| PPX2026XTN246X0071 - WHEEL PROS, LLC | PHOENIX, AZ | $9,458 |
| LAND ROVER OF OCALA | OCALA, FL | $9,268 |
| FLORENCE HARDWOODS, LLC | FLORENCE, WI | $8,595 |
| MUNICIPIO DE ARECIBO-DIVISI?N DE TRANSPORTE Y EQUIPO | ARECIBO, PR | $7,000 |
Free toolbox talk
A 5-minute crew talk on 1910.177(c)(1), plus alerts when this rule changes. Free.
OSHA interpretation letters
None exist. OSHA has not published a letter of interpretation for 1910.177(c)(1).
Related parts of this rule
- 1910.177(c) Employee training 42 citations
Get your crew competent
Trainers on Black Belt Safety: Marc Harvey, Dana Reyes
Trainers and suppliers: feature your business on this rule for $25/month.
Frequently asked questions
Who must be trained?
All employees who service rim wheels.
What must training include?
At minimum, the applicable data in the charts (rim manuals) and the contents of this standard.
What if a worker cannot read the manual?
The employer must instruct them on its contents in a manner they are able to understand.
About this page
Sources
- 29 CFR 1910.177 (eCFR), text current as of 2026-10-15
- U.S. Department of Labor enforcement data: OSHA inspections, citations and accident records, copied nightly; data as of 2026-10-24
3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.