1910.216(e): Trip and emergency switches
Key takeaways
- 1910.216(e) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart O).
- Free 5-minute toolbox talk for your crew below.
In this article
What this rule covers
29 CFR 1910.216(e) ("Trip and emergency switches") is one requirement inside 1910.216 Mills and calenders in the rubber and plastics industries, an OSHA general industry standard (Part 1910, Subpart O). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.
Official text
(e) Trip and emergency switches. All trip and emergency switches shall not be of the automatically resetting type, but shall require manual resetting.
Source: eCFR, text current as of 2026-10-15. Read all of 1910.216.
Free toolbox talk
A 5-minute crew talk on 1910.216(e), plus alerts when this rule changes. Free.
OSHA interpretation letters
- Trip and Emergency Switches on Mills and Calenders (2021-08-31)
- Use of an emergency jog reverse control during mill rescue operations. (1983-06-30)
Get your crew competent
Trainers on Black Belt Safety: Marc Harvey, Dana Reyes
Trainers and suppliers: feature your business on this rule for $25/month.
About this page
Sources
- 29 CFR 1910.216 (eCFR), text current as of 2026-10-15
- U.S. Department of Labor enforcement data: OSHA inspections, citations and accident records, copied nightly
3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.