1910.269(d)(3)(ii)(D): OSHA rule
Key takeaways
- 1910.269(d)(3)(ii)(D) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart R).
- Related part: 1910.269(d) Hazardous energy control (lockout/tagout) procedures (47 citations).
- Free 5-minute toolbox talk for your crew below.
Get the free 5-minute toolbox talk on 1910.269(d)(3)(ii)(D) ↓
In this article
What this rule covers
29 CFR 1910.269(d)(3)(ii)(D) is one requirement inside 1910.269 Electric power generation, transmission, and distribution, an OSHA general industry standard (Part 1910, Subpart R). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.
Official text
(D) Tagout devices, including their means of attachment, shall be substantial enough to prevent inadvertent or accidental removal. Tagout device attachment means shall be of a non-reusable type, attachable by hand, self-locking, and nonreleasable with a minimum unlocking strength of no less than 50 pounds and shall have the general design and basic characteristics of being at least equivalent to a one-piece, all-environment-tolerant nylon cable tie.
Source: eCFR, text current as of 2026-10-15. Read all of 1910.269.
Free toolbox talk
A 5-minute crew talk on 1910.269(d)(3)(ii)(D), plus alerts when this rule changes. Free.
OSHA interpretation letters
None exist. OSHA has not published a letter of interpretation for 1910.269(d)(3)(ii)(D).
Related parts of this rule
- 1910.269(d) Hazardous energy control (lockout/tagout) procedures 47 citations
- 1910.269(d)(2) General 31 citations
- 1910.269(d)(6) Lockout/tagout application 13 citations
- 1910.269(d)(2)(i) 10 citations
- 1910.269(d)(2)(iii) 8 citations
- 1910.269(d)(2)(iv) 5 citations
- 1910.269(d)(3) Protective materials and hardware 2 citations
- 1910.269(d)(2)(iv)(B) 2 citations
- 1910.269(d)(6)(iv) 2 citations
- 1910.269(d)(3)(ii) 1 citations
- 1910.269(d)(5) Notification 1 citations
- 1910.269(d)(4) Energy isolation
Get your crew competent
Trainers on Black Belt Safety: Marc Harvey
Trainers and suppliers: feature your business on this rule for $25/month.
About this page
Sources
- 29 CFR 1910.269 (eCFR), text current as of 2026-10-15
- U.S. Department of Labor enforcement data: OSHA inspections, citations and accident records, copied nightly
3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.