29 CFR 1910 · General Industry · Subpart E

1910.39(c): What a Fire Prevention Plan Must Include

By Black Belt Safety Editorial Team Official text as of octubre 15, 2026 Data updated noviembre 6, 2026 3 min read

In plain words:

Employers' fire prevention plans must include a list of all major fire hazards with handling and storage procedures, ignition sources and their control, and the fire protection equipment for each hazard. Plans must also cover control of flammable and combustible waste, maintenance of safeguards on heat-producing equipment, and the names or job titles of employees responsible for ignition sources and fuel source hazards.

Key takeaways

  • 1910.39(c) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart E).
  • OSHA cited it 18 times in the last 3 years, in 12 inspections, with $33,744 in current penalties.
  • Most citations: PR (7), MA (2), HI (2).
  • Free 5-minute toolbox talk for your crew below.

Get the free 5-minute toolbox talk on 1910.39(c) ↓

18citations, 3 years
$33,744current penalties
12inspections
0linked injury cases
In this article
  1. What this rule covers
  2. Official text
  3. Where and how often it was cited
  4. Free toolbox talk
  5. OSHA interpretation letters
  6. Get your crew competent
  7. Frequently asked questions
  8. About this page

What this rule covers

29 CFR 1910.39(c) ("Minimum elements of a fire prevention plan") is one requirement inside 1910.39 Fire prevention plans, an OSHA general industry standard (Part 1910, Subpart E). It includes 5 sub-paragraphs. The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(c) Minimum elements of a fire prevention plan. A fire prevention plan must include: 18 citations

(1) A list of all major fire hazards, proper handling and storage procedures for hazardous materials, potential ignition sources and their control, and the type of fire protection equipment necessary to control each major hazard; 7 citations

(2) Procedures to control accumulations of flammable and combustible waste materials; 4 citations

(3) Procedures for regular maintenance of safeguards installed on heat-producing equipment to prevent the accidental ignition of combustible materials; 1 citations

(4) The name or job title of employees responsible for maintaining equipment to prevent or control sources of ignition or fires; and 3 citations

(5) The name or job title of employees responsible for the control of fuel source hazards. 3 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.39.

See every company cited for this rule.

Export the list: 12 inspections cited 1910.39(c) in the last 3 years, with employer, location, penalty and date.

Purple Belt, $59/mo

Where and how often it was cited

YearCitations
20246
20254
20268

Top states: PR (7), MA (2), HI (2), VA (1), AK (1)

Largest penalties

EmployerLocationPenalty for this rule
GEORGIA PACIFIC WOOD PRODUCTSCAMDEN, TX$10,758
COMPREHENSIVE AT ORLEANS, LLCALBION, NY$8,511
MUNICIPALITY OF ANCHORAGEANCHORAGE, AK$7,366
LANDESTOY & SON AWNING , INCHIALEAH, FL$2,979
MARQUES WAREN, INC.HUMACAO, PR$2,830

Free toolbox talk

A 5-minute crew talk on 1910.39(c), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1910.39(c).

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

What must a fire prevention plan list?

All major fire hazards, proper handling and storage procedures for hazardous materials, potential ignition sources and their control, and the type of fire protection equipment needed to control each major hazard.

Does the plan need to cover waste?

Yes. It must include procedures to control accumulations of flammable and combustible waste materials.

Must people be named in the plan?

Yes. It must include the name or job title of employees responsible for maintaining ignition control equipment and for controlling fuel source hazards.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Desplácese hacia arriba