29 CFR 1926 · Construction · Subpart CC

1926.1441(c)(2)(i): Develop Safe Operating Procedures

By Black Belt Safety Editorial Team Official text as of octubre 15, 2026 Data updated octubre 20, 2026 3 min read

In plain words:

When the manufacturer's procedures are unavailable, the employer must develop, and ensure compliance with, all procedures necessary for the safe operation of the equipment and attachments.

Key takeaways

  • 1926.1441(c)(2)(i) is part of OSHA's construction standards (29 CFR Part 1926, Subpart CC).
  • OSHA cited it 1 times in the last 3 years, in 1 inspections, with $16,131 in current penalties.
  • 1 death is linked to inspections that cited this rule.
  • Related part: 1926.1441(c) Operation—procedures (2 citations).
  • Free 5-minute toolbox talk for your crew below.
1citations, 3 years
$16,131current penalties
1inspections
1linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Related parts of this rule
  8. Get your crew competent
  9. Frequently asked questions
  10. About this page

What this rule covers

29 CFR 1926.1441(c)(2)(i) is one requirement inside 1926.1441 Equipment with a rated hoisting/lifting capacity of 2,000 pounds or less, an OSHA construction standard (Part 1926, Subpart CC). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(i) When the manufacturer's procedures are unavailable, develop, and ensure compliance with, all procedures necessary for the safe operation of the equipment and attachments. 1 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1926.1441.

Injuries linked to this rule

1 death is linked to inspections where OSHA cited 1926.1441(c)(2)(i).

Employee falls from hoist and dies from blunt force trauma
2024-07-10 · Fatal · NEW YORK, NY

At 2:47 p.m. on July 10, 2024, Employee #1, employed by a construction company, was removing debris from a construction debris tarp on the ground level. Afterward, the empty tarp was hoisted back to the roof level. The employee was pulled up by the hoist…

Where and how often it was cited

Free toolbox talk

A 5-minute crew talk on 1926.1441(c)(2)(i), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1926.1441(c)(2)(i).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

When does this rule apply?

When the manufacturer's procedures are unavailable.

What must the employer develop?

All procedures necessary for the safe operation of the equipment and attachments.

Is writing them enough?

No, the employer must also ensure compliance with them.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Desplácese hacia arriba