1926.1441(f): Train Signal Persons
For equipment covered by this section, the employer must train each signal person in the proper use of signals applicable to the use of the equipment.
Key takeaways
- 1926.1441(f) is part of OSHA's construction standards (29 CFR Part 1926, Subpart CC).
- OSHA cited it 1 times in the last 3 years, in 1 inspections, with $16,131 in current penalties.
- 1 death is linked to inspections that cited this rule.
- Free 5-minute toolbox talk for your crew below.
In this article
What this rule covers
29 CFR 1926.1441(f) ("Signal person qualifications") is one requirement inside 1926.1441 Equipment with a rated hoisting/lifting capacity of 2,000 pounds or less, an OSHA construction standard (Part 1926, Subpart CC). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.
Official text
(f) Signal person qualifications. The employer must train each signal person in the proper use of signals applicable to the use of the equipment. 1 citations
Source: eCFR, text current as of 2026-10-15. Read all of 1926.1441.
Injuries linked to this rule
1 death is linked to inspections where OSHA cited 1926.1441(f).
At 2:47 p.m. on July 10, 2024, Employee #1, employed by a construction company, was removing debris from a construction debris tarp on the ground level. Afterward, the empty tarp was hoisted back to the roof level. The employee was pulled up by the hoist…
Where and how often it was cited
Free toolbox talk
A 5-minute crew talk on 1926.1441(f), plus alerts when this rule changes. Free.
OSHA interpretation letters
None exist. OSHA has not published a letter of interpretation for 1926.1441(f).
Get your crew competent
Trainers on Black Belt Safety: Marc Harvey, Dana Reyes
Trainers and suppliers: feature your business on this rule for $25/month.
Frequently asked questions
Who must be trained?
Each signal person.
What must the training cover?
The proper use of signals applicable to the use of the equipment.
Who provides the training?
The employer.
About this page
Sources
- 29 CFR 1926.1441 (eCFR), text current as of 2026-10-15
- U.S. Department of Labor enforcement data: OSHA inspections, citations and accident records, copied nightly; data as of 2026-10-20
3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.