1926.200(d): Exit signs
Key takeaways
- 1926.200(d) is part of OSHA's construction standards (29 CFR Part 1926, Subpart G).
- Free 5-minute toolbox talk for your crew below.
Get the free 5-minute toolbox talk on 1926.200(d) ↓
In this article
What this rule covers
29 CFR 1926.200(d) ("Exit signs") is one requirement inside 1926.200 Accident prevention signs and tags, an OSHA construction standard (Part 1926, Subpart G). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.
Official text
(d) Exit signs. Exit signs, when required, shall be lettered in legible red letters, not less than 6 inches high, on a white field and the principal stroke of the letters shall be at least three-fourths inch in width.
Source: eCFR, text current as of 2026-10-15. Read all of 1926.200.
Free toolbox talk
A 5-minute crew talk on 1926.200(d), plus alerts when this rule changes. Free.
OSHA interpretation letters
None exist. OSHA has not published a letter of interpretation for 1926.200(d).
Get your crew competent
Trainers on Black Belt Safety: Marc Harvey
Trainers and suppliers: feature your business on this rule for $25/month.
About this page
Sources
- 29 CFR 1926.200 (eCFR), text current as of 2026-10-15
- U.S. Department of Labor enforcement data: OSHA inspections, citations and accident records, copied nightly
3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.