29 CFR 1926 · Construction · Subpart L

1926.451(f)(1): Do Not Overload Scaffolds

By Black Belt Safety Editorial Team Official text as of octubre 15, 2026 Data updated octubre 20, 2026 3 min read

In plain words:

Employers must not load scaffolds or scaffold components in excess of their maximum intended loads or rated capacities, whichever is less.

Key takeaways

  • 1926.451(f)(1) is part of OSHA's construction standards (29 CFR Part 1926, Subpart L).
  • OSHA cited it 15 times in the last 3 years, in 15 inspections, with $34,179 in current penalties.
  • 1 death is linked to inspections that cited this rule.
  • Most citations: VA (5), NY (3), ID (2).
  • Related part: 1926.451(f) Use (1,221 citations).
  • Free 5-minute toolbox talk for your crew below.
15citations, 3 years
$34,179current penalties
15inspections
1linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Related parts of this rule
  8. Get your crew competent
  9. Frequently asked questions
  10. About this page

What this rule covers

29 CFR 1926.451(f)(1) is one requirement inside 1926.451 General requirements, an OSHA construction standard (Part 1926, Subpart L). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(1) Scaffolds and scaffold components shall not be loaded in excess of their maximum intended loads or rated capacities, whichever is less. 15 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1926.451.

Injuries linked to this rule

1 death is linked to inspections where OSHA cited 1926.451(f)(1).

Employee is killed when catapulted from elevated platform
2024-03-29 · Fatal · VICTOR, ID

At 10:30 a.m. on March 29, 2024, an employee was standing in a rough terrain forklift elevated platform to perform some elevated framing activities. The front outriggers were not in use. When extending the boom and basket to reach the work, the capacity was exceeded,…

Where and how often it was cited

YearCitations
20232
20248
20251
20264

Top states: VA (5), NY (3), ID (2), FL (1), OH (1)

Largest penalties

EmployerLocationPenalty for this rule
STUCCO WORKS INC.MIAMI BEACH, FL$10,535
ARCHITECTURAL GLASS AND METAL, INC.SARATOGA SPRINGS, NY$5,297
HI COOL INC.BROOKLYN, NY$4,965
A.HDZ CONSTRUCTION, LLCVICTOR, ID$4,839
MJZ SERVICES LLCALBANY, NY$2,660

Free toolbox talk

A 5-minute crew talk on 1926.451(f)(1), plus alerts when this rule changes. Free.




OSHA interpretation letters

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

How much can a scaffold hold?

No more than its maximum intended load or rated capacity, whichever is less.

Does this apply to components?

Yes. It applies to scaffolds and scaffold components.

What if the two limits differ?

Use whichever is less.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Desplácese hacia arriba