1926.502(c)(4)(ii): Certifying a Net Without a Drop Test
If the employer can show a drop test is unreasonable, the employer or a competent person must certify the net installation in writing before use. The record must identify the net, give the date and be signed, and the latest record must be kept at the jobsite.
Official text: 29 CFR 1926.502(c)(4)(ii)
(ii) When the employer can demonstrate that it is unreasonable to perform the drop-test required by paragraph (c)(4)(i) of this section, the employer (or a designated competent person) shall certify that the net and net installation is in compliance with the provisions of paragraphs (c)(3) and (c)(4)(i) of this section by preparing a certification record prior to the net being used as a fall protection system. The certification record must include an identification of the net and net installation for which the certification record is being prepared; the date that it was determined that the identified net and net installation were in compliance with paragraph (c)(3) of this section and the signature of the person making the determination and certification. The most recent certification record for each net and net installation shall be available at the jobsite for inspection.
Source: eCFR, text current as of 2026-10-15. Read all of 1926.502.
Free toolbox talk for this rule
A 5-minute crew talk on 1926.502(c)(4)(ii), plus alerts when this rule changes. Free.
OSHA interpretation letters
Related parts of this rule
- 1926.502(c) Safety net systems 5 citations
- 1926.502(c)(4) 1 citations
Get your crew competent
Trainers on Black Belt Safety: Marc Harvey, Dana Reyes
Trainers and suppliers: feature your business on this rule for $25/month.
About this page
Official text from the eCFR. Citation and injury numbers from public U.S. Department of Labor enforcement and accident records, copied nightly; 3-year window; data as of . Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.