1926.602(a)(2)(i): Seat Belts Required on Equipment
Seat belts must be provided on all equipment covered by 1926.602 and must meet SAE J386-1969, Seat Belts for Construction Equipment. Seat belts for agricultural and light industrial tractors must meet SAE J333a-1970.
Key takeaways
- 1926.602(a)(2)(i) is part of OSHA's construction standards (29 CFR Part 1926, Subpart O).
- OSHA cited it 5 times in the last 3 years, in 5 inspections, with $8,940 in current penalties.
- 1 death is linked to inspections that cited this rule.
- Related part: 1926.602(a) Earthmoving equipment; General (75 citations).
- Free 5-minute toolbox talk for your crew below.
In this article
What this rule covers
29 CFR 1926.602(a)(2)(i) is one requirement inside 1926.602 Material handling equipment, an OSHA construction standard (Part 1926, Subpart O). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.
Official text
(i) Seat belts shall be provided on all equipment covered by this section and shall meet the requirements of the Society of Automotive Engineers, J386-1969, Seat Belts for Construction Equipment. Seat belts for agricultural and light industrial tractors shall meet the seat belt requirements of Society of Automotive Engineers J333a-1970, Operator Protection for Agricultural and Light Industrial Tractors. 5 citations
Source: eCFR, text current as of 2026-10-15. Read all of 1926.602.
Injuries linked to this rule
1 death is linked to inspections where OSHA cited 1926.602(a)(2)(i).
At 2:31 p.m. on June 10, 2024, Employee #1, employed by a construction company, was operating a Case 560 Trencher while traveling down a main road in a housing development. The road had an approximate 20% grade. While in transit from one job location to…
Where and how often it was cited
Free toolbox talk
A 5-minute crew talk on 1926.602(a)(2)(i), plus alerts when this rule changes. Free.
OSHA interpretation letters
Related parts of this rule
- 1926.602(a) Earthmoving equipment; General 75 citations
- 1926.602(a)(9) Audible alarms 56 citations
- 1926.602(a)(9)(ii) 31 citations
- 1926.602(a)(9)(i) 25 citations
- 1926.602(a)(3)(i) 10 citations
- 1926.602(a)(3) Access roadways and grades 10 citations
- 1926.602(a)(2) Seat belts 5 citations
- 1926.602(a)(4) Brakes 3 citations
- 1926.602(a)(1) 1 citations
- 1926.602(a)(6) Rollover protective structures (ROPS)
- 1926.602(a)(2)(ii)
Get your crew competent
Trainers on Black Belt Safety: Marc Harvey, Dana Reyes
Trainers and suppliers: feature your business on this rule for $25/month.
Frequently asked questions
What equipment needs seat belts under this paragraph?
All equipment covered by 1926.602.
What standard must construction equipment seat belts meet?
SAE J386-1969, Seat Belts for Construction Equipment.
What standard applies to light industrial tractors?
SAE J333a-1970, Operator Protection for Agricultural and Light Industrial Tractors.
About this page
Sources
- 29 CFR 1926.602 (eCFR), text current as of 2026-10-15
- U.S. Department of Labor enforcement data: OSHA inspections, citations and accident records, copied nightly; data as of 2026-10-20
3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.