29 CFR 1926 · Construction · Subpart D

1926.62(d)(1)(iii): Personal Sampling for Lead Exposure

By Black Belt Safety Editorial Team Official text as of octubre 15, 2026 Data updated octubre 20, 2026 3 min read

In plain words:

When lead exposure monitoring is required, except for monitoring under paragraph (d)(3), construction employers must collect personal samples that represent a full shift, with at least one sample for each job classification in each work area, either for each shift or for the shift with the highest exposure.

Key takeaways

  • 1926.62(d)(1)(iii) is part of OSHA's construction standards (29 CFR Part 1926, Subpart D).
  • OSHA cited it 28 times in the last 3 years, in 28 inspections, with $33,222 in current penalties.
  • Most citations: IL (6), CT (4), NY (4).
  • Related part: 1926.62(d) Exposure assessment (342 citations).
  • Free 5-minute toolbox talk for your crew below.
28citations, 3 years
$33,222current penalties
28inspections
0linked injury cases
In this article
  1. What this rule covers
  2. Official text
  3. Where and how often it was cited
  4. Free toolbox talk
  5. OSHA interpretation letters
  6. Related parts of this rule
  7. Get your crew competent
  8. Frequently asked questions
  9. About this page

What this rule covers

29 CFR 1926.62(d)(1)(iii) is one requirement inside 1926.62 Lead, an OSHA construction standard (Part 1926, Subpart D). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(iii) With the exception of monitoring under paragraph (d)(3), where monitoring is required under this section, the employer shall collect personal samples representative of a full shift including at least one sample for each job classification in each work area either for each shift or for the shift with the highest exposure level. 28 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1926.62.

Where and how often it was cited

YearCitations
20231
202414
202510
20263

Top states: IL (6), CT (4), NY (4), RI (3), PA (3)

Largest penalties

EmployerLocationPenalty for this rule
COMMODORE MAINTENANCE CORPORATIONBROOKLYN, NY$11,292
SEAMAN & SCHUSKE METAL WORKSSAINT JOSEPH, MO$4,840
68870 - MIDWEST PRO PAINTING, INC.LOUISVILLE, KY$3,920
NJ TRANSIT, RAILWAY MAINTENANCE DIVISIONRED BANK, NJ$3,750
TOWER MAINTENANCE CORPORATIONEAST HADDAM, CT$3,700

Free toolbox talk

A 5-minute crew talk on 1926.62(d)(1)(iii), plus alerts when this rule changes. Free.




OSHA interpretation letters

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

What kind of samples must be taken for lead?

Personal samples representative of a full shift.

How many samples are needed?

At least one sample for each job classification in each work area, either for each shift or for the shift with the highest exposure level.

Is any monitoring excluded from this paragraph?

Yes, monitoring under paragraph (d)(3) is the stated exception.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Desplácese hacia arriba