- 4 modules
- 12 pages
- about 25 minutes
For spray painters, powder coaters and supervisors: spray booth basics, keeping ignition sources away, ventilation, filters and residue disposal, hoses and grounding, cleaning solvents, no-smoking rules, and electrostatic and powder coating safety.
What this certificate covers
This certificate records completion of awareness training based on OSHA 29 CFR 1910.107. It is not an OSHA card or license. 29 CFR 1910.107 has no training requirement of its own. Your employer must still keep spraying within predetermined spraying areas, maintain the spray booths, ventilation, electrical equipment, grounding and residue disposal as 1910.107 requires, and post “No smoking” signs at all spraying areas and paint storage rooms. Training that other OSHA standards require for your job, such as respiratory protection or hazard communication, is separate.
¿Quieres enviar una reseña? Acceso y se matriculó
What you will learn
- Keep ignition sources out of and away from spraying areas
- Run ventilation correctly during and after spraying
- Handle filters, residue, rags and cleaning solvents safely
- Ground containers and equipment, and inspect hoses
- Apply electrostatic and powder coating rules
What you get
- About 25 minutes, on your phone or computer, read out loud as you go
- Real photos, not cartoons
- A hands-on drill: you make the calls, step by step, and see what happens
- 3 quick checks along the way, then a final quiz
- A certificate with a QR code your employer can check online
- A wallet card you can print and carry
- A printable study guide (PDF)
Training a crew? Add your workers, see who finished, and keep every certificate in one place. Train your team →
Course outline
- Booths, ignition and ventilation: The booth and ignition sources; Ventilation
- Operations and maintenance: Filters, residue, rags and solvents; Hoses, grounding and no smoking
- Electrostatic and powder coating: Electrostatic and powder coating
- On the job
Why it matters
Source: OSHA enforcement data, refreshed after each sync.
Questions
What does Spray Finishing with Flammable and Combustible Materials cover?
You will be able to: keep ignition sources out of and away from spraying areas; run ventilation correctly during and after spraying; handle filters, residue, rags and cleaning solvents safely; ground containers and equipment, and inspect hoses; apply electrostatic and powder coating rules.
Who is this course for?
It is written for spray painters, powder coaters and supervisors.
How long does it take?
About 25 minutes, on a phone or a computer. You can stop and pick up where you left off.
Do I get a certificate?
Yes. Score 80% or better on the final quiz and you get a certificate with a code your employer can check.
Which OSHA rule is it based on?
Based on OSHA 29 CFR 1910.107. It is awareness training: it is not an OSHA card, and your employer still has to train you on their own equipment and plan.
Course facts
- Who it is for: Spray painters, powder coaters and supervisors
- Trainer: Marc Harvey, Site Safety Officer (OSHA 30, CPR, USACE CQM)
- Time: about 25 minutes, on your phone or computer
- Final quiz pass mark: 80%, with a certificate employers can verify
- Based on OSHA 29 CFR 1910.107 (official text)
- Printable study guide (PDF) with the key points and practice questions, included with the course
- Answer key with OSHA citations for trainers (trainer plans)
Facts checked word for word against the official text (1 sources)
29 CFR 1910.107
Parte de The Dojo — Academia de Capacitación en Seguridad de OSHA
Included from Blue Belt up ($25/month), with every other course in the Dojo.
¡Consigue tu cinturón azul!Comparar cinturonesLea la guía gratuita — lo que exige la norma, en palabras sencillas.
