- 4 modules
- 12 pages
- about 25 minutes
For employees who run table saws, radial saws, bandsaws, jointers, shapers and sanders: power controls and restart protection, saw hoods, spreaders and nonkickback devices, radial saw setup, jointer and bandsaw guards, push sticks and keeping blades in good condition.
What this certificate covers
This certificate records completion of awareness training based on OSHA 29 CFR 1910.213. It is not an OSHA card or license. 29 CFR 1910.213 has no training requirement of its own. Your employer must still guard each machine as 1910.213 requires, provide a power control on each machine and a positive means to make electric machine controls inoperative during repairs or adjustments, provide combs (featherboards) or suitable jigs and push sticks or push blocks at the workplace, and remove dull, badly set, improperly filed, improperly tensioned or cracked saws from service.
¿Quieres enviar una reseña? Acceso y se matriculó
What you will learn
- Use machine power controls and lock out machines for repairs
- Check saw hoods, spreaders and nonkickback devices
- Set up radial saws, jointers and bandsaws with their guards
- Use push sticks, push blocks and featherboards
- Remove dull, cracked or badly set saws from service
What you get
- About 25 minutes, on your phone or computer, read out loud as you go
- Real photos, not cartoons
- A hands-on drill: you make the calls, step by step, and see what happens
- 3 quick checks along the way, then a final quiz
- A certificate with a QR code your employer can check online
- A wallet card you can print and carry
- A printable study guide (PDF)
Training a crew? Add your workers, see who finished, and keep every certificate in one place. Train your team →
Course outline
- Machine controls: Power, restart and repairs
- Circular and radial saws: Table saw hoods, spreaders and nonkickback fingers; Radial arm saws
- Bandsaws, jointers and upkeep: Bandsaws, jointers, shapers and sanders; Push sticks and saw condition
- On the job
Why it matters
Source: OSHA enforcement data, refreshed after each sync.
Questions
What does Woodworking Machinery Safety cover?
You will be able to: use machine power controls and lock out machines for repairs; check saw hoods, spreaders and nonkickback devices; set up radial saws, jointers and bandsaws with their guards; use push sticks, push blocks and featherboards; remove dull, cracked or badly set saws from service.
Who is this course for?
It is written for woodworkers and shop employees.
How long does it take?
About 25 minutes, on a phone or a computer. You can stop and pick up where you left off.
Do I get a certificate?
Yes. Score 80% or better on the final quiz and you get a certificate with a code your employer can check.
Which OSHA rule is it based on?
Based on OSHA 29 CFR 1910.213. It is awareness training: it is not an OSHA card, and your employer still has to train you on their own equipment and plan.
Course facts
- Who it is for: Woodworkers and shop employees
- Trainer: Marc Harvey, Site Safety Officer (OSHA 30, CPR, USACE CQM)
- Time: about 25 minutes, on your phone or computer
- Final quiz pass mark: 80%, with a certificate employers can verify
- Based on OSHA 29 CFR 1910.213 (official text)
- Printable study guide (PDF) with the key points and practice questions, included with the course
- Answer key with OSHA citations for trainers (trainer plans)
Facts checked word for word against the official text (1 sources)
29 CFR 1910.213
Parte de The Dojo — Academia de Capacitación en Seguridad de OSHA
Included from Blue Belt up ($25/month), with every other course in the Dojo.
¡Consigue tu cinturón azul!Comparar cinturonesLea la guía gratuita — lo que exige la norma, en palabras sencillas.
