29 CFR 1910 · General Industry · Subpart R

1910.266(d)(8)(i): Following Electrical Rules When Logging Near Lines

By Black Belt Safety Editorial Team Official text as of octubre 15, 2026 Data updated octubre 22, 2026 2 min read

In plain words:

Logging operations near overhead electric lines must be done in accordance with the requirements of 29 CFR 1910.333(c)(3).

Key takeaways

  • 1910.266(d)(8)(i) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart R).
  • OSHA cited it 1 times in the last 3 years, in 1 inspections, with $1,000 in current penalties.
  • 1 death is linked to inspections that cited this rule.
  • Related part: 1910.266(d) General requirements (90 citations).
  • Free 5-minute toolbox talk for your crew below.
1citations, 3 years
$1,000current penalties
1inspections
1linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Related parts of this rule
  8. Get your crew competent
  9. Frequently asked questions
  10. About this page

What this rule covers

29 CFR 1910.266(d)(8)(i) is one requirement inside 1910.266 Logging operations, an OSHA general industry standard (Part 1910, Subpart R). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(i) Logging operations near overhead electric lines shall be done in accordance with the requirements of 29 CFR 1910.333(c)(3). 1 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.266.

Injuries linked to this rule

1 death is linked to inspections where OSHA cited 1910.266(d)(8)(i).

Employee is killed when electrocuted by falling power line
2024-08-30 · Fatal · ELGIN, SC

At approximately 11:30 a.m. on August 30, 2024, Employee #1, a Skidder Operator,was filling the Skidder with fuel from the fuel service truck near an overhead line. The loader operator was retrieving dead wood, a process referred to as 'limbing,' to place on a tractor-trailer…

Where and how often it was cited

Free toolbox talk

A 5-minute crew talk on 1910.266(d)(8)(i), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1910.266(d)(8)(i).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

Which requirements apply?

29 CFR 1910.333(c)(3).

What work does this cover?

Logging operations near overhead electric lines.

Why point to the electrical rules?

They set the work practices for working near overhead lines.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Desplácese hacia arriba