1910.269(d)(6)(iv)(B): OSHA rule
Key takeaways
- 1910.269(d)(6)(iv)(B) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart R).
- Related part: 1910.269(d) Hazardous energy control (lockout/tagout) procedures (47 citations).
- Free 5-minute toolbox talk for your crew below.
Get the free 5-minute toolbox talk on 1910.269(d)(6)(iv)(B) ↓
In this article
What this rule covers
29 CFR 1910.269(d)(6)(iv)(B) is one requirement inside 1910.269 Electric power generation, transmission, and distribution, an OSHA general industry standard (Part 1910, Subpart R). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.
Official text
(B) Tagout devices shall be affixed in such a manner as will clearly indicate that the operation or movement of energy isolating devices from the “safe” or “off” position is prohibited.
(1) Where tagout devices are used with energy isolating devices designed with the capability of being locked out, the tag attachment shall be fastened at the same point at which the lock would have been attached.
(2) Where a tag cannot be affixed directly to the energy isolating device, the tag shall be located as close as safely possible to the device, in a position that will be immediately obvious to anyone attempting to operate the device.
Source: eCFR, text current as of 2026-10-15. Read all of 1910.269.
Free toolbox talk
A 5-minute crew talk on 1910.269(d)(6)(iv)(B), plus alerts when this rule changes. Free.
OSHA interpretation letters
None exist. OSHA has not published a letter of interpretation for 1910.269(d)(6)(iv)(B).
Related parts of this rule
- 1910.269(d) Hazardous energy control (lockout/tagout) procedures 47 citations
- 1910.269(d)(2) General 31 citations
- 1910.269(d)(6) Lockout/tagout application 13 citations
- 1910.269(d)(2)(i) 10 citations
- 1910.269(d)(2)(iii) 8 citations
- 1910.269(d)(2)(iv) 5 citations
- 1910.269(d)(3) Protective materials and hardware 2 citations
- 1910.269(d)(2)(iv)(B) 2 citations
- 1910.269(d)(6)(iv) 2 citations
- 1910.269(d)(3)(ii) 1 citations
- 1910.269(d)(5) Notification 1 citations
- 1910.269(d)(3)(ii)(D)
Get your crew competent
Trainers on Black Belt Safety: Marc Harvey
Trainers and suppliers: feature your business on this rule for $25/month.
About this page
Sources
- 29 CFR 1910.269 (eCFR), text current as of 2026-10-15
- U.S. Department of Labor enforcement data: OSHA inspections, citations and accident records, copied nightly
3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.