1910.269(l)(4)(ii)(B): Keeping Rubber Gloves On Until Clear
The employer must make sure an employee using rubber insulating gloves and sleeves does not remove them until he or she is in a position where he or she cannot reach into the minimum approach distance set by the employer.
Key takeaways
- 1910.269(l)(4)(ii)(B) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart R).
- OSHA cited it 2 times in the last 3 years, in 2 inspections, with $2,420 in current penalties.
- 1 death is linked to inspections that cited this rule.
- Related part: 1910.269(l) Working on or near exposed energized parts (75 citations).
- Free 5-minute toolbox talk for your crew below.
In this article
What this rule covers
29 CFR 1910.269(l)(4)(ii)(B) is one requirement inside 1910.269 Electric power generation, transmission, and distribution, an OSHA general industry standard (Part 1910, Subpart R). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.
Official text
(B) Does not remove the rubber insulating gloves and sleeves until he or she is in a position where he or she cannot reach into the minimum approach distance, established by the employer under paragraph (l)(3)(i) of this section. 2 citations
Source: eCFR, text current as of 2026-10-15. Read all of 1910.269.
Injuries linked to this rule
1 death is linked to inspections where OSHA cited 1910.269(l)(4)(ii)(B).
At 10:45 a.m. on May 20, 2024, a crew of four from Complete Power Pole Inspection, Inc., employed by the City of Lubbock, was preparing to reenergize power pole 0CR2 as part of their inspection and maintenance of powerlines running to water pumps. While being…
Where and how often it was cited
Free toolbox talk
A 5-minute crew talk on 1910.269(l)(4)(ii)(B), plus alerts when this rule changes. Free.
OSHA interpretation letters
None exist. OSHA has not published a letter of interpretation for 1910.269(l)(4)(ii)(B).
Related parts of this rule
- 1910.269(l) Working on or near exposed energized parts 75 citations
- 1910.269(l)(3) Minimum approach distances 28 citations
- 1910.269(l)(3)(iii) 26 citations
- 1910.269(l)(8) Protection from flames and electric arcs 18 citations
- 1910.269(l)(1) General 13 citations
- 1910.269(l)(8)(v) 9 citations
- 1910.269(l)(1)(ii) 6 citations
- 1910.269(l)(5) Working position 6 citations
- 1910.269(l)(1)(iii) 5 citations
- 1910.269(l)(3)(iii)(A) 5 citations
- 1910.269(l)(5)(ii) 5 citations
- 1910.269(l)(2) At least two employees 4 citations
Get your crew competent
Trainers on Black Belt Safety: Marc Harvey, Dana Reyes
Trainers and suppliers: feature your business on this rule for $25/month.
Frequently asked questions
When may rubber insulating gloves and sleeves be removed?
Only when the employee is in a position where he or she cannot reach into the minimum approach distance.
Who establishes the minimum approach distance?
The employer, under paragraph (l)(3)(i) of 1910.269.
Does this cover sleeves too?
Yes. It covers both the rubber insulating gloves and sleeves.
About this page
Sources
- 29 CFR 1910.269 (eCFR), text current as of 2026-10-15
- U.S. Department of Labor enforcement data: OSHA inspections, citations and accident records, copied nightly; data as of 2026-10-24
3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.