29 CFR 1910 · General Industry · Subpart S

1910.305(j)(2)(vii): Wet Location Receptacles with Attended Use

By Black Belt Safety Editorial Team Official text as of octubre 15, 2026 Data updated octubre 20, 2026 3 min read

In plain words:

Employers must make sure a receptacle installed in a wet location, where the item plugged into it will be attended while in use (such as portable tools), has an enclosure that is weatherproof when the attachment plug cap is removed.

Key takeaways

  • 1910.305(j)(2)(vii) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart S).
  • OSHA cited it 23 times in the last 3 years, in 23 inspections, with $20,928 in current penalties.
  • Most citations: VA (4), OR (4), MN (4).
  • Related part: 1910.305(j) Equipment for general use (359 citations).
  • Free 5-minute toolbox talk for your crew below.
23citations, 3 years
$20,928current penalties
23inspections
0linked injury cases
In this article
  1. What this rule covers
  2. Official text
  3. Where and how often it was cited
  4. Free toolbox talk
  5. OSHA interpretation letters
  6. Related parts of this rule
  7. Get your crew competent
  8. Frequently asked questions
  9. About this page

What this rule covers

29 CFR 1910.305(j)(2)(vii) is one requirement inside 1910.305 Wiring methods, components, and equipment for general use, an OSHA general industry standard (Part 1910, Subpart S). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(vii) A receptacle installed in a wet location where the product intended to be plugged into it will be attended while in use (for example, portable tools) shall have an enclosure that is weatherproof when the attachment plug cap is removed. 23 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.305.

Where and how often it was cited

YearCitations
20247
20256
202610

Top states: VA (4), OR (4), MN (4), PR (3), MI (2)

Largest penalties

EmployerLocationPenalty for this rule
109044 - BIX PRODUCE COMPANY LLCSAINT PAUL, MN$4,800
WFM SOUTHERN NEVADA INCLAS VEGAS, NV$4,230
107785 - WEST CENTRAL TURKEYS LLCPELICAN RAPIDS, MN$3,500
107788 - PACKERS SANITATION SERVICES INC LTDPELICAN RAPIDS, MN$3,000
317742085 - DS SERVICES OF AMERICA INCPORTLAND, OR$2,471

Free toolbox talk

A 5-minute crew talk on 1910.305(j)(2)(vii), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1910.305(j)(2)(vii).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

What enclosure is needed for a wet location receptacle used with attended tools?

One that is weatherproof when the attachment plug cap is removed.

What is an example of attended use?

Portable tools that are attended while in use.

Where does this apply?

Receptacles installed in wet locations.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Desplácese hacia arriba