29 CFR 1926 · Construction · Subpart Z

1926.1101(h)(3)(iv)(A): Respirators for Class I Asbestos Work

By Black Belt Safety Editorial Team Official text as of octubre 15, 2026 Data updated octubre 23, 2026 3 min read

In plain words:

Employers must provide a tight-fitting powered air-purifying respirator, or a full facepiece supplied-air respirator in pressure-demand mode with HEPA egress cartridges or an auxiliary positive-pressure SCBA, for employees doing Class I asbestos work in a regulated area without a negative exposure assessment, when the exposure assessment shows levels at or below 1 f/cc as an 8-hour TWA.

Key takeaways

  • 1926.1101(h)(3)(iv)(A) is part of OSHA's construction standards (29 CFR Part 1926, Subpart Z).
  • OSHA cited it 16 times in the last 3 years, in 16 inspections, with $8,200 in current penalties.
  • Most citations: MI (15), OR (1).
  • Related part: 1926.1101(h) Respiratory protection (204 citations).
  • Free 5-minute toolbox talk for your crew below.
16citations, 3 years
$8,200current penalties
16inspections
0linked injury cases
In this article
  1. What this rule covers
  2. Official text
  3. Where and how often it was cited
  4. Free toolbox talk
  5. OSHA interpretation letters
  6. Related parts of this rule
  7. Get your crew competent
  8. Frequently asked questions
  9. About this page

What this rule covers

29 CFR 1926.1101(h)(3)(iv)(A) is one requirement inside 1926.1101 Asbestos, an OSHA construction standard (Part 1926, Subpart Z). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(A) A tight-fitting powered air-purifying respirator or a full facepiece, supplied-air respirator operated in the pressure-demand mode and equipped with either HEPA egress cartridges or an auxiliary positive-pressure, self-contained breathing apparatus (SCBA) whenever the employees are in a regulated area performing Class I asbestos work for which a negative exposure assessment is not available and the exposure assessment indicates that the exposure level will be at or below 1 f/cc as an 8-hour time-weighted average (TWA). 16 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1926.1101.

Where and how often it was cited

YearCitations
20249
20254
20263

Top states: MI (15), OR (1)

Largest penalties

EmployerLocationPenalty for this rule
RIGHTWAY REMEDIATION LLCBLOOMFIELD HILLS, MI$4,000
RIGHTWAY REMEDIATION LLCFLINT, MI$1,400
MICHIGAN MECHANICAL ABATEMENT, INC.SAGINAW, MI$1,400
ENVIRONMENTAL AND TECHNICAL CONTROLS, INC.MARSHALL, MI$1,000
FEDERAL ENVIRONMENTAL CONTRACTING INC.ROYAL OAK, MI$400

Free toolbox talk

A 5-minute crew talk on 1926.1101(h)(3)(iv)(A), plus alerts when this rule changes. Free.




OSHA interpretation letters

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

When does this respirator rule apply?

During Class I asbestos work in a regulated area with no negative exposure assessment, when exposure is assessed at or below 1 f/cc as an 8-hour TWA.

What respirators meet this rule?

A tight-fitting PAPR, or a full facepiece supplied-air respirator in pressure-demand mode with HEPA egress cartridges or an auxiliary positive-pressure SCBA.

What does TWA mean?

Time-weighted average, here measured over 8 hours.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Desplácese hacia arriba