29 CFR 1926 · Construction · Subpart Z

1926.1101(k)(9)(iv)(A): Asbestos Training for Roofing, Flooring and Similar Work

By Black Belt Safety Editorial Team Official text as of octubre 15, 2026 Data updated octubre 20, 2026 3 min read

In plain words:

For work with asbestos-containing roofing, flooring, siding, ceiling tiles or transite panels, employers must provide training that includes at a minimum all elements of paragraph (k)(9)(viii), plus the specific work practices and engineering controls in paragraph (g) for that category. The course must include hands-on training and take at least 8 hours.

Key takeaways

  • 1926.1101(k)(9)(iv)(A) is part of OSHA's construction standards (29 CFR Part 1926, Subpart Z).
  • OSHA cited it 26 times in the last 3 years, in 26 inspections, with $61,792 in current penalties.
  • Most citations: OR (7), VA (6), NJ (3).
  • Related part: 1926.1101(k) Communication of hazards (631 citations).
  • Free 5-minute toolbox talk for your crew below.
26citations, 3 years
$61,792current penalties
26inspections
0linked injury cases
In this article
  1. What this rule covers
  2. Official text
  3. Where and how often it was cited
  4. Free toolbox talk
  5. OSHA interpretation letters
  6. Related parts of this rule
  7. Get your crew competent
  8. Frequently asked questions
  9. About this page

What this rule covers

29 CFR 1926.1101(k)(9)(iv)(A) is one requirement inside 1926.1101 Asbestos, an OSHA construction standard (Part 1926, Subpart Z). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(A) For work with asbestos containing roofing materials, flooring materials, siding materials, ceiling tiles, or transite panels, training shall include at a minimum all the elements included in paragraph (k)(9)(viii) of this section and in addition, the specific work practices and engineering controls set forth in paragraph (g) of this section which specifically relate to that category. Such course shall include “hands-on” training and shall take at least 8 hours. 26 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1926.1101.

Where and how often it was cited

YearCitations
20231
20249
202513
20263

Top states: OR (7), VA (6), NJ (3), CO (2), KY (1)

Largest penalties

EmployerLocationPenalty for this rule
MEDICAL ASSOCIATES CLINIC, P.C.DUBUQUE, IA$14,895
317742273 - MT ANGEL TOWERS OREG LTDMOUNT ANGEL, OR$8,474
317735295 - KEIZER NURSING & REHAB CENTER LLCKEIZER, OR$6,917
CUMBERLAND COUNTY PUBLIC WORKSPORT NORRIS, NJ$5,000
DAVID LOPEZSAN ANTONIO, TX$3,547

Free toolbox talk

A 5-minute crew talk on 1926.1101(k)(9)(iv)(A), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1926.1101(k)(9)(iv)(A).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

How long must this training be?

At least 8 hours.

Must it include hands-on practice?

Yes, the course must include hands-on training.

What materials does it cover?

Asbestos-containing roofing, flooring, siding, ceiling tiles or transite panels.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Desplácese hacia arriba