1926.1101(k)(9)(iv): Training for Other Class II Asbestos Work
Employers must train workers doing Class II asbestos work with roofing, flooring, siding, ceiling tiles or transite panels in the elements of paragraph (k)(9)(viii) plus the work practices and engineering controls for that material, with hands-on training lasting at least 8 hours. Workers handling more than one category need training for each material and removal method, and other Class II work needs similar training with hands-on practice.
Key takeaways
- 1926.1101(k)(9)(iv) is part of OSHA's construction standards (29 CFR Part 1926, Subpart Z).
- OSHA cited it 28 times in the last 3 years, in 28 inspections, with $62,596 in current penalties.
- Most citations: OR (7), VA (7), NJ (3).
- Related part: 1926.1101(k) Communication of hazards (631 citations).
- Free 5-minute toolbox talk for your crew below.
In this article
What this rule covers
29 CFR 1926.1101(k)(9)(iv) is one requirement inside 1926.1101 Asbestos, an OSHA construction standard (Part 1926, Subpart Z). It includes 3 sub-paragraphs. The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.
Official text
(iv) Training for other Class II work. 28 citations
(A) For work with asbestos containing roofing materials, flooring materials, siding materials, ceiling tiles, or transite panels, training shall include at a minimum all the elements included in paragraph (k)(9)(viii) of this section and in addition, the specific work practices and engineering controls set forth in paragraph (g) of this section which specifically relate to that category. Such course shall include “hands-on” training and shall take at least 8 hours. Open (k)(9)(iv)(a) 26 citations
(B) An employee who works with more than one of the categories of material specified in paragraph (k)(9)(iv)(A) of this section shall receive training in the work practices applicable to each category of material that the employee removes and each removal method that the employee uses.
(C) For Class II operations not involving the categories of material specified in paragraph (k)(9)(iv)(A) of this section, training shall be provided which shall include at a minimum all the elements included in paragraph (k)(9)(viii) of this section and in addition, the specific work practices and engineering controls set forth in paragraph (g) of this section which specifically relate to the category of material being removed, and shall include “hands-on” training in the work practices applicable to each category of material that the employee removes and each removal method that the employee uses. 2 citations
Source: eCFR, text current as of 2026-10-15. Read all of 1926.1101.
Where and how often it was cited
| Year | Citations |
|---|---|
| 2023 | 1 |
| 2024 | 10 |
| 2025 | 14 |
| 2026 | 3 |
Top states: OR (7), VA (7), NJ (3), CO (2), KY (1)
Largest penalties
| Employer | Location | Penalty for this rule |
|---|---|---|
| MEDICAL ASSOCIATES CLINIC, P.C. | DUBUQUE, IA | $14,895 |
| 317742273 - MT ANGEL TOWERS OREG LTD | MOUNT ANGEL, OR | $8,474 |
| 317735295 - KEIZER NURSING & REHAB CENTER LLC | KEIZER, OR | $6,917 |
| CUMBERLAND COUNTY PUBLIC WORKS | PORT NORRIS, NJ | $5,000 |
| DAVID LOPEZ | SAN ANTONIO, TX | $3,547 |
Free toolbox talk
A 5-minute crew talk on 1926.1101(k)(9)(iv), plus alerts when this rule changes. Free.
OSHA interpretation letters
None exist. OSHA has not published a letter of interpretation for 1926.1101(k)(9)(iv).
Related parts of this rule
- 1926.1101(k) Communication of hazards 631 citations
- 1926.1101(k)(3) 269 citations
- 1926.1101(k)(9) Employee Information and Training 160 citations
- 1926.1101(k)(3)(i) 144 citations
- 1926.1101(k)(3)(ii) 124 citations
- 1926.1101(k)(2) Duties of building and facility owners 121 citations
- 1926.1101(k)(9)(i) 105 citations
- 1926.1101(k)(2)(ii) 64 citations
- 1926.1101(k)(2)(i) 57 citations
- 1926.1101(k)(5) 31 citations
- 1926.1101(k)(9)(iv)(A) 26 citations
- 1926.1101(k)(5)(i) 25 citations
Get your crew competent
Trainers on Black Belt Safety: Marc Harvey, Dana Reyes
Trainers and suppliers: feature your business on this rule for $25/month.
Frequently asked questions
How long is training for Class II roofing or flooring work?
At least 8 hours, including hands-on training.
What if a worker removes more than one type of material?
The worker must receive training in the work practices for each category of material removed and each removal method used.
What must training for other Class II work include?
The elements of paragraph (k)(9)(viii), the specific work practices and engineering controls for the material, and hands-on training.
About this page
Sources
- 29 CFR 1926.1101 (eCFR), text current as of 2026-10-15
- U.S. Department of Labor enforcement data: OSHA inspections, citations and accident records, copied nightly; data as of 2026-10-20
3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.