29 CFR 1910 · General Industry

1910.1026(d)(2)(iv): Hexavalent Chromium Monitoring Above the PEL

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated October 20, 2026 3 min read

In plain words:

If monitoring shows employee exposure to hexavalent chromium above the PEL, the employer must do periodic monitoring at least every three months.

Key takeaways

  • 1910.1026(d)(2)(iv) is part of OSHA's general industry standards (29 CFR Part 1910).
  • OSHA cited it 6 times in the last 3 years, in 6 inspections, with $20,477 in current penalties.
  • 1 death is linked to inspections that cited this rule.
  • Related part: 1910.1026(d) Exposure determination (252 citations).
  • Free 5-minute toolbox talk for your crew below.
6citations, 3 years
$20,477current penalties
6inspections
1linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Related parts of this rule
  8. Get your crew competent
  9. Frequently asked questions
  10. About this page

What this rule covers

29 CFR 1910.1026(d)(2)(iv) is one requirement inside 1910.1026 Chromium (VI), an OSHA general industry standard (Part 1910). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(iv) If monitoring reveals employee exposures to be above the PEL, the employer shall perform periodic monitoring at least every three months. 6 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.1026.

Injuries linked to this rule

1 death is linked to inspections where OSHA cited 1910.1026(d)(2)(iv).

Employee inhales plastic dust, later dies from pneumonia
2024-05-02 · Fatal · RIO RANCHO, NM

At 10:00 a.m. on February 23, 2024, an employee working as a machine operator for an aircraft parts manufacturer was working in the fabrication department. The employee inhaled plastic dust which led to the employee developing pneumonia. At 9:00 a.m. on May 2, 2024, the…

Where and how often it was cited

Free toolbox talk

A 5-minute crew talk on 1910.1026(d)(2)(iv), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1910.1026(d)(2)(iv).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

How often must monitoring happen above the PEL?

At least every three months.

What triggers this monitoring?

Monitoring that reveals employee exposures above the PEL.

Who must do the monitoring?

The employer.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top