1910.1026(f)(1)(ii): OSHA rule
Key takeaways
- 1910.1026(f)(1)(ii) is part of OSHA's general industry standards (29 CFR Part 1910).
- Related part: 1910.1026(f) Methods of compliance (16 citations).
- Free 5-minute toolbox talk for your crew below.
In this article
What this rule covers
29 CFR 1910.1026(f)(1)(ii) is one requirement inside 1910.1026 Chromium (VI), an OSHA general industry standard (Part 1910). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.
Official text
(ii) Where painting of aircraft or large aircraft parts is performed in the aerospace industry, the employer shall use engineering and work practice controls to reduce and maintain employee exposure to chromium (VI) to or below 25 µgm/m3 unless the employer can demonstrate that such controls are not feasible. The employer shall supplement such engineering and work practice controls with the use of respiratory protection that complies with the requirements of paragraph (g) of this section to achieve the PEL.
Source: eCFR, text current as of 2026-10-15. Read all of 1910.1026.
Free toolbox talk
A 5-minute crew talk on 1910.1026(f)(1)(ii), plus alerts when this rule changes. Free.
OSHA interpretation letters
Related parts of this rule
- 1910.1026(f) Methods of compliance 16 citations
- 1910.1026(f)(1) Engineering and work practice controls 16 citations
- 1910.1026(f)(1)(i) 15 citations
- 1910.1026(f)(2) Prohibition of rotation
Get your crew competent
Trainers on Black Belt Safety: Marc Harvey, Dana Reyes
Trainers and suppliers: feature your business on this rule for $25/month.
About this page
Sources
- 29 CFR 1910.1026 (eCFR), text current as of 2026-10-15
- U.S. Department of Labor enforcement data: OSHA inspections, citations and accident records, copied nightly
3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.