29 CFR 1910 · General Industry

1910.1053(f)(2)(i): Contents of the Silica Control Plan

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated November 17, 2026 3 min read

In plain words:

Employers must set up and carry out a written silica exposure control plan. It must describe the tasks that involve exposure to respirable crystalline silica, the engineering controls, work practices and respiratory protection used for each task, and the housekeeping measures used to limit exposure.

Key takeaways

  • 1910.1053(f)(2)(i) is part of OSHA's general industry standards (29 CFR Part 1910).
  • OSHA cited it 374 times in the last 3 years, in 364 inspections, with $450,755 in current penalties.
  • Most citations: IL (47), MI (28), NY (28).
  • Related part: 1910.1053(f) Methods of compliance (519 citations).
  • Free 5-minute toolbox talk for your crew below.

Get the free 5-minute toolbox talk on 1910.1053(f)(2)(i) ↓

374citations, 3 years
$450,755current penalties
364inspections
0linked injury cases
In this article
  1. What this rule covers
  2. Official text
  3. Where and how often it was cited
  4. Free toolbox talk
  5. OSHA interpretation letters
  6. Related parts of this rule
  7. Get your crew competent
  8. Frequently asked questions
  9. About this page

What this rule covers

29 CFR 1910.1053(f)(2)(i) is one requirement inside 1910.1053 Respirable crystalline silica, an OSHA general industry standard (Part 1910). It includes 3 sub-paragraphs. The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(i) The employer shall establish and implement a written exposure control plan that contains at least the following elements: 374 citations

(A) A description of the tasks in the workplace that involve exposure to respirable crystalline silica; Open (f)(2)(i)(a) 10 citations

(B) A description of the engineering controls, work practices, and respiratory protection used to limit employee exposure to respirable crystalline silica for each task; and 7 citations

(C) A description of the housekeeping measures used to limit employee exposure to respirable crystalline silica. 3 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.1053.

See every company cited for this rule.

Export the list: 364 inspections cited 1910.1053(f)(2)(i) in the last 3 years, with employer, location, penalty and date.

Purple Belt, $59/mo

Where and how often it was cited

YearCitations
20238
2024165
2025127
202674

Top states: IL (47), MI (28), NY (28), PA (26), OH (22)

Largest penalties

EmployerLocationPenalty for this rule
FLORIM USA, INC.CLARKSVILLE, TN$50,000
FOLEY PRODUCTS COMPANY, LLCCLANTON, AL$32,514
CLASSIC FLOORS & INTERIORS, LLCLAS VEGAS, NV$16,131
GT STONE GRANITE LLCCARTERSVILLE, GA$11,916
ALUDYNE COLUMBUS, LLCCOLUMBUS, GA$11,292

Free toolbox talk

A 5-minute crew talk on 1910.1053(f)(2)(i), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1910.1053(f)(2)(i).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

What three things must the silica plan describe?

Tasks with silica exposure, the controls, work practices and respiratory protection for each task, and housekeeping measures.

Is a verbal plan enough?

No. The plan must be written.

Must the plan be followed?

Yes. The employer must establish and implement it.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top