29 CFR 1910 · General Industry · Subpart H

1910.107(g): Spray Finishing Operations and Maintenance

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated November 17, 2026 4 min read

In plain words:

Employers must keep spraying inside predetermined spraying areas and keep those areas as free of combustible residue as practical, cleaning daily if needed with nonsparking tools. Residue must be removed and disposed of right away, soaked rags go in approved metal waste cans emptied at least daily or at shift end, clothing is not left overnight unless in metal lockers, cleaning solvents are limited by flashpoint, and incompatible coatings are not mixed in one booth.

Key takeaways

  • 1910.107(g) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart H).
  • OSHA cited it 247 times in the last 3 years, in 205 inspections, with $253,585 in current penalties.
  • Most citations: TN (31), MI (28), MD (22).
  • Related part: 1910.107(g)(2) Cleaning (139 citations).
  • Free 5-minute toolbox talk for your crew below.

Get the free 5-minute toolbox talk on 1910.107(g) ↓

247citations, 3 years
$253,585current penalties
205inspections
0linked injury cases
In this article
  1. What this rule covers
  2. Official text
  3. Where and how often it was cited
  4. Free toolbox talk
  5. OSHA interpretation letters
  6. Related parts of this rule
  7. Get your crew competent
  8. Frequently asked questions
  9. About this page

What this rule covers

29 CFR 1910.107(g) ("Operations and maintenance") is one requirement inside 1910.107 Spray finishing using flammable and combustible materials, an OSHA general industry standard (Part 1910, Subpart H). It includes 7 sub-paragraphs. The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(g) Operations and maintenance — 247 citations

(1) Spraying. Spraying shall not be conducted outside of predetermined spraying areas. Open (g)(1) 11 citations

(2) Cleaning. All spraying areas shall be kept as free from the accumulation of deposits of combustible residues as practical, with cleaning conducted daily if necessary. Scrapers, spuds, or other such tools used for cleaning purposes shall be of nonsparking material. Open (g)(2) 139 citations

(3) Residue disposal. Residue scrapings and debris contaminated with residue shall be immediately removed from the premises and properly disposed of. Approved metal waste cans shall be provided wherever rags or waste are impregnated with finishing material and all such rags or waste deposited therein immediately after use. The contents of waste cans shall be properly disposed of at least once daily or at the end of each shift. Open (g)(3) 35 citations

(4) Clothing storage. Spray finishing employees' clothing shall not be left on the premises overnight unless kept in metal lockers. 1 citations

(5) Cleaning solvents. The use of solvents for cleaning operations shall be restricted to those having flashpoints not less than 100 °F.; however, for cleaning spray nozzles and auxiliary equipment, solvents having flashpoints not less than those normally used in spray operations may be used. Such cleaning shall be conducted inside spray booths and ventilating equipment operated during cleaning. Open (g)(5) 5 citations

(6) Hazardous materials combinations. Spray booths shall not be alternately used for different types of coating materials, where the combination of the materials may be conducive to spontaneous ignition, unless all deposits of the first used material are removed from the booth and exhaust ducts prior to spraying with the second used material. 1 citations

(7) “No Smoking” signs. “No smoking” signs in large letters on contrasting color background shall be conspicuously posted at all spraying areas and paint storage rooms. Open (g)(7) 55 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.107.

See every company cited for this rule.

Export the list: 205 inspections cited 1910.107(g) in the last 3 years, with employer, location, penalty and date.

Purple Belt, $59/mo

Where and how often it was cited

YearCitations
20234
202488
202573
202682

Top states: TN (31), MI (28), MD (22), VA (13), MN (13)

Largest penalties

EmployerLocationPenalty for this rule
VTCU, CORP.POCATELLO, ID$16,550
ORLANDI STATUARY COMPANYCHICAGO, IL$11,800
JV MANUFACTURING, INC.SPRINGDALE, AR$9,675
PROCESS MANUFACTURING COMPANY, INC.TULSA, OK$9,100
THE AMERICAN TANK & FABRICATING COMPANYCLEVELAND, OH$8,900

Free toolbox talk

A 5-minute crew talk on 1910.107(g), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1910.107(g).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

Where can spray finishing be done?

Spraying shall not be conducted outside of predetermined spraying areas.

How often must waste cans with soaked rags be emptied?

The contents must be properly disposed of at least once daily or at the end of each shift.

What tools can be used to scrape spray residue?

Scrapers, spuds or other cleaning tools must be of nonsparking material.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top