29 CFR 1910 · General Industry · Subpart H

1910.110(f)(4): LP-Gas Storage in Industrial Buildings

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated October 20, 2026 3 min read

In plain words:

Employers must not store more than 300 pounds of LP-Gas in buildings not frequented by the public, except as provided in subparagraph (5). Containers on highway mobile service vehicles do not count if the vehicles are in private garages and have one container of not more than 100 pounds, with all valves closed.

Key takeaways

  • 1910.110(f)(4) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart H).
  • OSHA cited it 10 times in the last 3 years, in 10 inspections, with $16,038 in current penalties.
  • Most citations: MD (4), VA (2), OK (1).
  • Related part: 1910.110(f) Storage of containers awaiting use or resale (214 citations).
  • Free 5-minute toolbox talk for your crew below.
10citations, 3 years
$16,038current penalties
10inspections
0linked injury cases
In this article
  1. What this rule covers
  2. Official text
  3. Where and how often it was cited
  4. Free toolbox talk
  5. OSHA interpretation letters
  6. Related parts of this rule
  7. Get your crew competent
  8. Frequently asked questions
  9. About this page

What this rule covers

29 CFR 1910.110(f)(4) ("Storage within buildings not frequented by the public (such as industrial buildings)") is one requirement inside 1910.110 Storage and handling of liquefied petroleum gases, an OSHA general industry standard (Part 1910, Subpart H). It includes 2 sub-paragraphs. The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(4) Storage within buildings not frequented by the public (such as industrial buildings). 10 citations

(i) The quantity of LP-Gas stored shall not exceed 300 pounds (approximately 2,550 cubic feet in vapor form) except as provided in subparagraph (5) of this paragraph. Open (f)(4)(i) 10 citations

(ii) Containers carried as a part of service equipment on highway mobile vehicles are not to be considered in the total storage capacity in subdivision (i) of this subparagraph provided such vehicles are stored in private garages, and are limited to one container per vehicle with an LP-Gas capacity of not more than 100 pounds. All container valves shall be closed.

Source: eCFR, text current as of 2026-10-15. Read all of 1910.110.

Where and how often it was cited

YearCitations
20244
20253
20263

Top states: MD (4), VA (2), OK (1), CO (1), NJ (1)

Largest penalties

EmployerLocationPenalty for this rule
A & A COMPANY, INC.SOUTH PLAINFIELD, NJ$4,966
AVION HOSPITALITYTULSA, OK$3,485
PHARMACANN INC.STEVENSVILLE, MD$2,040
HERBAL GARDEN, LLCPUEBLO, CO$1,911
SHEPARD EXPOSITION SERVICES, INC.COLUMBIA, MD$1,890

Free toolbox talk

A 5-minute crew talk on 1910.110(f)(4), plus alerts when this rule changes. Free.




OSHA interpretation letters

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

How much LP-Gas can be stored inside?

Not more than 300 pounds (about 2,550 cubic feet in vapor form), except as provided in subparagraph (5).

Do vehicle containers count?

Not if the vehicles are stored in private garages and have one container per vehicle of not more than 100 pounds.

What about container valves?

All container valves shall be closed.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top