29 CFR 1910 · General Industry · Subpart H

1910.119(g)(1)(i): PSM Initial Process Training

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated October 21, 2026 3 min read

In plain words:

Employers must train each employee operating a process, and each employee before operating a newly assigned process, in an overview of the process and its operating procedures. Training must emphasize the specific safety and health hazards, emergency operations including shutdown, and safe work practices for the employee's job tasks.

Key takeaways

  • 1910.119(g)(1)(i) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart H).
  • OSHA cited it 26 times in the last 3 years, in 26 inspections, with $155,505 in current penalties.
  • Most citations: OH (4), TN (3), OR (3).
  • Related part: 1910.119(g) Training (59 citations).
  • Free 5-minute toolbox talk for your crew below.
26citations, 3 years
$155,505current penalties
26inspections
0linked injury cases
In this article
  1. What this rule covers
  2. Official text
  3. Where and how often it was cited
  4. Free toolbox talk
  5. OSHA interpretation letters
  6. Related parts of this rule
  7. Get your crew competent
  8. Frequently asked questions
  9. About this page

What this rule covers

29 CFR 1910.119(g)(1)(i) is one requirement inside 1910.119 Process safety management of highly hazardous chemicals, an OSHA general industry standard (Part 1910, Subpart H). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(i) Each employee presently involved in operating a process, and each employee before being involved in operating a newly assigned process, shall be trained in an overview of the process and in the operating procedures as specified in paragraph (f) of this section. The training shall include emphasis on the specific safety and health hazards, emergency operations including shutdown, and safe work practices applicable to the employee's job tasks. 26 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.119.

Where and how often it was cited

YearCitations
20232
202410
20257
20267

Top states: OH (4), TN (3), OR (3), PA (3), WI (3)

Largest penalties

EmployerLocationPenalty for this rule
BAE SYSTEMS ORDNANCE SYSTEMS INC.RADFORD, VA$16,550
AMTEC CORPORATIONCLEAR LAKE, SD$16,131
DOUBLE R BRAND FOODS LLCLUFKIN, TX$14,895
SPRAY PRODUCTS CORPORATIONPLYMOUTH MEETING, PA$14,518
317738482 - FERRELLGAS LPEAGLE CREEK, OR$13,833

Free toolbox talk

A 5-minute crew talk on 1910.119(g)(1)(i), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1910.119(g)(1)(i).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

Who needs initial process training?

Each employee presently operating a process, and each employee before operating a newly assigned process.

What must training emphasize?

Specific safety and health hazards, emergency operations including shutdown, and safe work practices for the job.

What does training cover?

An overview of the process and the operating procedures.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top