29 CFR 1910 · General Industry · Subpart H

1910.119(o)(1): PSM Compliance Audits

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated November 6, 2026 3 min read

In plain words:

Employers covered by process safety management must certify that they have evaluated compliance with the standard at least every three years, to verify that the procedures and practices they developed are adequate and are being followed.

Key takeaways

  • 1910.119(o)(1) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart H).
  • OSHA cited it 32 times in the last 3 years, in 32 inspections, with $183,292 in current penalties.
  • Most citations: MI (7), VA (4), NJ (3).
  • Related part: 1910.119(o) Compliance Audits (42 citations).
  • Free 5-minute toolbox talk for your crew below.

Get the free 5-minute toolbox talk on 1910.119(o)(1) ↓

32citations, 3 years
$183,292current penalties
32inspections
0linked injury cases
In this article
  1. What this rule covers
  2. Official text
  3. Where and how often it was cited
  4. Free toolbox talk
  5. OSHA interpretation letters
  6. Related parts of this rule
  7. Get your crew competent
  8. Frequently asked questions
  9. About this page

What this rule covers

29 CFR 1910.119(o)(1) is one requirement inside 1910.119 Process safety management of highly hazardous chemicals, an OSHA general industry standard (Part 1910, Subpart H). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(1) Employers shall certify that they have evaluated compliance with the provisions of this section at least every three years to verify that the procedures and practices developed under the standard are adequate and are being followed. 32 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.119.

See every company cited for this rule.

Export the list: 32 inspections cited 1910.119(o)(1) in the last 3 years, with employer, location, penalty and date.

Purple Belt, $59/mo

Where and how often it was cited

YearCitations
20233
202411
20259
20269

Top states: MI (7), VA (4), NJ (3), TN (2), MO (2)

Largest penalties

EmployerLocationPenalty for this rule
ACCURATE ENERGETIC SYSTEMS, LLCMC EWEN, TN$70,000
GOLDEN GATE PETROLEUM OF COLORADO, LLCFRUITA, CO$11,585
THE HOME CITY ICE COMPANYCHICAGO, IL$11,000
PACEM DEFENSE LLCPERRY, FL$9,045
HK COOPERATIVE, INC.SANDUSKY, OH$8,678

Free toolbox talk

A 5-minute crew talk on 1910.119(o)(1), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1910.119(o)(1).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

How often must PSM compliance audits be done?

At least every three years.

What must the audit verify?

That the procedures and practices developed under the standard are adequate and are being followed.

What does the employer have to do?

Certify that they have evaluated compliance.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top