29 CFR 1910 · General Industry · Subpart I

1910.140(c)(13)(i): Anchorage Strength of 5,000 Pounds

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated October 20, 2026 2 min read

In plain words:

Anchorages for personal fall arrest systems must be capable of supporting at least 5,000 pounds for each employee attached, or meet the other option listed in the rule.

Key takeaways

  • 1910.140(c)(13)(i) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart I).
  • OSHA cited it 27 times in the last 3 years, in 27 inspections, with $136,938 in current penalties.
  • 1 death is linked to inspections that cited this rule.
  • Most citations: NY (5), OH (3), OK (2).
  • Related part: 1910.140(c) General requirements (196 citations).
  • Free 5-minute toolbox talk for your crew below.
27citations, 3 years
$136,938current penalties
27inspections
1linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Related parts of this rule
  8. Get your crew competent
  9. Frequently asked questions
  10. About this page

What this rule covers

29 CFR 1910.140(c)(13)(i) is one requirement inside 1910.140 Personal fall protection systems, an OSHA general industry standard (Part 1910, Subpart I). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(i) Capable of supporting at least 5,000 pounds (22.2 kN) for each employee attached; or 27 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.140.

Injuries linked to this rule

1 death is linked to inspections where OSHA cited 1910.140(c)(13)(i).

Employee sustains injuries in fall from roof, later dies
2024-08-07 · Fatal · SHERWOOD, OR

At 1:30 p.m. on August 7, 2024, an employee had been working as a roofer for a roofing contractor. The employee was working at a height of approximately 10 to 15 feet before falling to the lower level. The employee was found either by the…

Where and how often it was cited

YearCitations
20234
20247
202514
20262

Top states: NY (5), OH (3), OK (2), TX (2), MA (2)

Largest penalties

EmployerLocationPenalty for this rule
317737440 - JIM FISHER ROOFING AND CONSTRUCTION INCSHERWOOD, OR$30,984
POWDR - COPPER MOUNTAIN LLCFRISCO, CO$11,823
KING'S WELL SERVICE, LLCBLACKWELL, OK$11,292
PACIFICORPPOINT OF ROCKS, WY$11,162
DDP GROUP, INC.MIDDLETOWN, DE$9,931

Free toolbox talk

A 5-minute crew talk on 1910.140(c)(13)(i), plus alerts when this rule changes. Free.




OSHA interpretation letters

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

How strong must a fall arrest anchorage be?

Capable of supporting at least 5,000 pounds (22.2 kN) for each employee attached, under this option.

Is this per worker?

Yes, at least 5,000 pounds for each employee attached.

Is there another option?

Yes. This paragraph ends with or, meaning another option is listed in the rule.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top