1910.213(d): Hoods on Crosscut Table Saws
Employers must guard each hand-fed circular crosscut table saw with a hood that meets all the requirements of paragraph (c)(1) for hoods on circular ripsaws.
Key takeaways
- 1910.213(d) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart O).
- OSHA cited it 103 times in the last 3 years, in 103 inspections, with $257,867 in current penalties.
- Most citations: NC (10), PA (8), TX (7).
- Related part: 1910.213(d)(1) (103 citations).
- Free 5-minute toolbox talk for your crew below.
In this article
What this rule covers
29 CFR 1910.213(d) ("Hand-fed crosscut table saws") is one requirement inside 1910.213 Woodworking machinery requirements, an OSHA general industry standard (Part 1910, Subpart O). It includes 2 sub-paragraphs. The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.
Official text
(d) Hand-fed crosscut table saws. 103 citations
(1) Each circular crosscut table saw shall be guarded by a hood which shall meet all the requirements of paragraph (c)(1) of this section for hoods for circular ripsaws. Open (d)(1) 103 citations
(2) [Reserved]
Source: eCFR, text current as of 2026-10-15. Read all of 1910.213.
Where and how often it was cited
| Year | Citations |
|---|---|
| 2023 | 7 |
| 2024 | 41 |
| 2025 | 37 |
| 2026 | 18 |
Top states: NC (10), PA (8), TX (7), NY (6), OR (6)
Largest penalties
| Employer | Location | Penalty for this rule |
|---|---|---|
| NICHOLSON CORP. | WHITEHOUSE STATION, NJ | $16,550 |
| WHITE OAK DISPLAY AND DESIGN, L.P. | PALMYRA, PA | $12,400 |
| LEWIS BROTHERS LUMBER COMPANY, INC. | ALICEVILLE, AL | $8,921 |
| MOLDED FIBER GLASS CONSTRUCTION AND WATER PRODUCTS | INDEPENDENCE, KS | $8,297 |
| 159560 - BLUE RIDGE WOODWORKING, LLC | MORGANTON, NC | $8,275 |
Free toolbox talk
A 5-minute crew talk on 1910.213(d), plus alerts when this rule changes. Free.
OSHA interpretation letters
None exist. OSHA has not published a letter of interpretation for 1910.213(d).
Related parts of this rule
- 1910.213(d)(1) 103 citations
Get your crew competent
Trainers on Black Belt Safety: Marc Harvey, Dana Reyes
Trainers and suppliers: feature your business on this rule for $25/month.
Frequently asked questions
What guard is required on a crosscut table saw?
A hood that meets all the requirements of 1910.213(c)(1) for circular ripsaw hoods.
Which saws are covered?
Hand-fed circular crosscut table saws.
Can the hood be removed?
The saw must be guarded by the hood.
About this page
Sources
- 29 CFR 1910.213 (eCFR), text current as of 2026-10-15
- U.S. Department of Labor enforcement data: OSHA inspections, citations and accident records, copied nightly; data as of 2026-10-21
3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.