1910.268(f): Rubber Insulating Equipment for Telecom Work
Telecommunications employers must provide rubber insulating equipment designed for the voltages encountered, make sure it is used, and follow 1910.137 except Table I-6. Employers must retest gloves, blankets and similar gear electrically, visually and mechanically at maximum intervals of 12 months new or 9 months reissued for natural rubber, and 18 or 15 months for synthetic. Gloves and blankets must be marked with the next test date, and defective gloves destroyed.
Key takeaways
- 1910.268(f) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart R).
- OSHA cited it 6 times in the last 3 years, in 5 inspections, with $16,047 in current penalties.
- 1 death is linked to inspections that cited this rule.
- Related part: 1910.268(f)(1) (5 citations).
- Free 5-minute toolbox talk for your crew below.
Get the free 5-minute toolbox talk on 1910.268(f) ↓
In this article
What this rule covers
29 CFR 1910.268(f) ("Rubber insulating equipment") is one requirement inside 1910.268 Telecommunications, an OSHA general industry standard (Part 1910, Subpart R). It includes 3 sub-paragraphs. The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.
Official text
(f) Rubber insulating equipment. 6 citations
(1) Rubber insulating equipment designed for the voltage levels to be encountered shall be provided and the employer shall ensure that they are used by employees as required by this section. The requirements of § 1910.137, Electrical Protective Equipment, shall be followed except for Table I-6. Open (f)(1) 5 citations
(2) The employer is responsible for the periodic retesting of all insulating gloves, blankets, and other rubber insulating equipment. This retesting shall be electrical, visual and mechanical. The following maximum retesting intervals shall apply: 1 citations
| Gloves, blankets, and other insulating equipment | Natural rubber | Synthetic rubber |
|---|---|---|
| Months | ||
| New | 12 | 18 |
| Re-issued | 9 | 15 |
(3) Gloves and blankets shall be marked to indicate compliance with the retest schedule, and shall be marked with the date the next test is due. Gloves found to be defective in the field or by the tests set forth in paragraph (f)(2) of this section shall be destroyed by cutting them open from the finger to the gauntlet.
Source: eCFR, text current as of 2026-10-15. Read all of 1910.268.
Export the list: 5 inspections cited 1910.268(f) in the last 3 years, with employer, location, penalty and date.
Purple Belt, $59/moInjuries linked to this rule
1 death is linked to inspections where OSHA cited 1910.268(f).
At 1:30 p.m. on August 3, 2024, an employee was in a vehicle-mounted boom lift, cutting tree branches that were adjacent to an electric/fiberoptic line pole. A portion of the tree was in contact with the energized electric line. As the employee was cutting a…
Where and how often it was cited
Free toolbox talk
A 5-minute crew talk on 1910.268(f), plus alerts when this rule changes. Free.
OSHA interpretation letters
None exist. OSHA has not published a letter of interpretation for 1910.268(f).
Related parts of this rule
- 1910.268(f)(1) 5 citations
Get your crew competent
Trainers on Black Belt Safety: Marc Harvey
Trainers and suppliers: feature your business on this rule for $25/month.
Frequently asked questions
How often must natural rubber gloves be retested?
Maximum intervals of 12 months when new and 9 months when re-issued.
How must defective gloves be destroyed?
By cutting them open from the finger to the gauntlet.
What marking is required?
Gloves and blankets must be marked to show retest compliance and the date the next test is due.
About this page
Sources
- 29 CFR 1910.268 (eCFR), text current as of 2026-10-15
- U.S. Department of Labor enforcement data: OSHA inspections, citations and accident records, copied nightly; data as of 2026-11-17
3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.
