29 CFR 1910 · General Industry · Subpart D

1910.29(b)(2)(i): Midrail Height

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated November 17, 2026 2 min read

In plain words:

Midrails must be installed at a height midway between the top edge of the guardrail system and the walking-working surface.

Key takeaways

  • 1910.29(b)(2)(i) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart D).
  • OSHA cited it 114 times in the last 3 years, in 114 inspections, with $197,256 in current penalties.
  • Most citations: IL (13), TN (11), OR (8).
  • Related part: 1910.29(b) Guardrail systems (632 citations).
  • Free 5-minute toolbox talk for your crew below.

Get the free 5-minute toolbox talk on 1910.29(b)(2)(i) ↓

114citations, 3 years
$197,256current penalties
114inspections
0linked injury cases
In this article
  1. What this rule covers
  2. Official text
  3. Where and how often it was cited
  4. Free toolbox talk
  5. OSHA interpretation letters
  6. Related parts of this rule
  7. Get your crew competent
  8. Frequently asked questions
  9. About this page

What this rule covers

29 CFR 1910.29(b)(2)(i) is one requirement inside 1910.29 Fall protection systems and falling object protection—criteria and practices, an OSHA general industry standard (Part 1910, Subpart D). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(i) Midrails are installed at a height midway between the top edge of the guardrail system and the walking-working surface; 114 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.29.

See every company cited for this rule.

Export the list: 114 inspections cited 1910.29(b)(2)(i) in the last 3 years, with employer, location, penalty and date.

Purple Belt, $59/mo

Where and how often it was cited

YearCitations
20234
202437
202541
202632

Top states: IL (13), TN (11), OR (8), NJ (7), MD (7)

Largest penalties

EmployerLocationPenalty for this rule
JOHNSONVILLE, LLCSHEBOYGAN FALLS, WI$11,585
SEA BOX INC.CINNAMINSON, NJ$10,600
A&A BROCHU, LLC.ENFIELD, ME$10,163
RFX2026XJL680X0070 - CAVCO INDUSTRIES, INC. DBA DURANGO HOMESPHOENIX, AZ$10,050
RV WORLD LLCHAMBURG, PA$9,457

Free toolbox talk

A 5-minute crew talk on 1910.29(b)(2)(i), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1910.29(b)(2)(i).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

Where must a midrail be installed?

Midway between the top edge of the guardrail system and the walking-working surface.

Does this rule give an exact inch measurement?

No. It sets the midrail at the midway point.

What is a midrail for?

It is part of the guardrail system between the top rail and the surface.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top