29 CFR 1910 · General Industry · Subpart T

1910.423(d)(1): Basic Information for Each Dive

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated October 20, 2026 3 min read

In plain words:

For each diving operation, employers must record and keep the names of dive team members including the person-in-charge, date, time and location, diving modes, general nature of work, approximate underwater and surface conditions, and maximum depth and bottom time for each diver.

Key takeaways

  • 1910.423(d)(1) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart T).
  • OSHA cited it 2 times in the last 3 years, in 2 inspections, with $5,912 in current penalties.
  • 1 death is linked to inspections that cited this rule.
  • Related part: 1910.423(d) Record of dive (2 citations).
  • Free 5-minute toolbox talk for your crew below.
2citations, 3 years
$5,912current penalties
2inspections
1linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Related parts of this rule
  8. Get your crew competent
  9. Frequently asked questions
  10. About this page

What this rule covers

29 CFR 1910.423(d)(1) is one requirement inside 1910.423 Post-dive procedures, an OSHA general industry standard (Part 1910, Subpart T). It includes 6 sub-paragraphs. The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(1) The following information shall be recorded and maintained for each diving operation: 2 citations

(i) Names of dive team members including designated person-in-charge;

(ii) Date, time, and location;

(iii) Diving modes used;

(iv) General nature of work performed;

(v) Approximate underwater and surface conditions (visibility, water temperature and current); and

(vi) Maximum depth and bottom time for each diver.

Source: eCFR, text current as of 2026-10-15. Read all of 1910.423.

Injuries linked to this rule

1 death is linked to inspections where OSHA cited 1910.423(d)(1).

Employee dies of unknown causes during test commercial dive
2024-06-25 · Fatal · MANNS HARBOR, NC

At 2:00 p.m. on June 25, 2024, an employee working as a commercial diver for a highway and bridge contractor had descended 19 feet to the ocean floor. The employee was acclimating himself for a commercial diving operation. The employeewas a new diver to the…

Where and how often it was cited

Free toolbox talk

A 5-minute crew talk on 1910.423(d)(1), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1910.423(d)(1).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

Must the person-in-charge be named?

Yes. Names of dive team members including the designated person-in-charge must be recorded.

What conditions are recorded?

Approximate underwater and surface conditions: visibility, water temperature and current.

What depth information is needed?

Maximum depth and bottom time for each diver.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top