29 CFR 1926 · Construction · Subpart Z

1926.1126(d): Determining Chromium (VI) Exposure

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated October 19, 2026 5 min read

In plain words:

Employers covered by the construction chromium (VI) rule must determine each exposed employee's 8-hour TWA exposure using either paragraph (d)(2) or (d)(3) of the rule. Under scheduled monitoring, they must do initial monitoring, then periodic monitoring at least every six months at or above the action level or every three months above the PEL, plus more monitoring after changes.

Key takeaways

  • 1926.1126(d) is part of OSHA's construction standards (29 CFR Part 1926, Subpart Z).
  • OSHA cited it 11 times in the last 3 years, in 10 inspections, with $935 in current penalties.
  • Most citations: MI (5), NY (5), OR (1).
  • Related part: 1926.1126(d)(3) Performance-oriented option.
  • Free 5-minute toolbox talk for your crew below.
11citations, 3 years
$935current penalties
10inspections
0linked injury cases
In this article
  1. What this rule covers
  2. Official text
  3. Where and how often it was cited
  4. Free toolbox talk
  5. OSHA interpretation letters
  6. Related parts of this rule
  7. Get your crew competent
  8. Frequently asked questions
  9. About this page

What this rule covers

29 CFR 1926.1126(d) ("Exposure determination") is one requirement inside 1926.1126 Chromium (VI), an OSHA construction standard (Part 1926, Subpart Z). It includes 16 sub-paragraphs. The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(d) Exposure determination — 11 citations

(1) General. Each employer who has a workplace or work operation covered by this section shall determine the 8-hour TWA exposure for each employee exposed to chromium (VI). This determination shall be made in accordance with either paragraph (d)(2) or paragraph (d)(3) of this section. 4 citations

(2) Scheduled monitoring option. 7 citations

(i) The employer shall perform initial monitoring to determine the 8-hour TWA exposure for each employee on the basis of a sufficient number of personal breathing zone air samples to accurately characterize full shift exposure on each shift, for each job classification, in each work area. Where an employer does representative sampling instead of sampling all employees in order to meet this requirement, the employer shall sample the employee(s) expected to have the highest chromium (VI) exposures. 7 citations

(ii) If initial monitoring indicates that employee exposures are below the action level, the employer may discontinue monitoring for those employees whose exposures are represented by such monitoring.

(iii) If monitoring reveals employee exposures to be at or above the action level, the employer shall perform periodic monitoring at least every six months.

(iv) If monitoring reveals employee exposures to be above the PEL, the employer shall perform periodic monitoring at least every three months.

(v) If periodic monitoring indicates that employee exposures are below the action level, and the result is confirmed by the result of another monitoring taken at least seven days later, the employer may discontinue the monitoring for those employees whose exposures are represented by such monitoring.

(vi) The employer shall perform additional monitoring when there has been any change in the production process, raw materials, equipment, personnel, work practices, or control methods that may result in new or additional exposures to chromium (VI), or when the employer has any reason to believe that new or additional exposures have occurred.

(3) Performance-oriented option. The employer shall determine the 8-hour TWA exposure for each employee on the basis of any combination of air monitoring data, historical monitoring data, or objective data sufficient to accurately characterize employee exposure to chromium (VI). Open (d)(3)

(4) Employee notification of determination results.

(i) Within 5 work days after making an exposure determination in accordance with paragraph (d)(2) or paragraph (d)(3) of this section, the employer shall individually notify each affected employee in writing of the results of that determination or post the results in an appropriate location accessible to all affected employees.

(ii) Whenever the exposure determination indicates that employee exposure is above the PEL, the employer shall describe in the written notification the corrective action being taken to reduce employee exposure to or below the PEL.

(5) Accuracy of measurement. Where air monitoring is performed to comply with the requirements of this section, the employer shall use a method of monitoring and analysis that can measure chromium (VI) to within an accuracy of plus or minus 25 percent (±25%) and can produce accurate measurements to within a statistical confidence level of 95 percent for airborne concentrations at or above the action level.

(6) Observation of monitoring.

(i) Where air monitoring is performed to comply with the requirements of this section, the employer shall provide affected employees or their designated representatives an opportunity to observe any monitoring of employee exposure to chromium (VI).

(ii) When observation of monitoring requires entry into an area where the use of protective clothing or equipment is required, the employer shall provide the observer with clothing and equipment and shall assure that the observer uses such clothing and equipment and complies with all other applicable safety and health procedures.

Source: eCFR, text current as of 2026-10-15. Read all of 1926.1126.

Where and how often it was cited

YearCitations
20231
20244
20256

Top states: MI (5), NY (5), OR (1)

Largest penalties

EmployerLocationPenalty for this rule
MCSHANE MECHANICAL CONTRACTING, INC.ANN ARBOR, MI$750
317733278 - ANDRITZ INCOR$185
LESCO DESIGN & MANUFACTURING COMPANY, INC.HOLLAND, MI$0
HEMI SYSTEMSFRANKLINVILLE, NY$0
EGC CONSTRUCTION CORPFRANKLINVILLE, NY$0

Free toolbox talk

A 5-minute crew talk on 1926.1126(d), plus alerts when this rule changes. Free.




OSHA interpretation letters

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

How often is periodic monitoring needed?

At least every six months if exposures are at or above the action level, and at least every three months if above the PEL.

Can monitoring stop?

Yes, if initial monitoring is below the action level, or if periodic results below the action level are confirmed by another result taken at least seven days later.

Who must be sampled in representative sampling?

The employee(s) expected to have the highest chromium (VI) exposures.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top