29 CFR 1926 · Construction · Subpart Z

1926.1153(i)(2)(i): What Silica Training Must Cover

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated October 19, 2026 3 min read

In plain words:

Construction employers must make sure each employee covered by the silica standard can demonstrate knowledge and understanding of silica health hazards, tasks that can lead to exposure, the controls, work practices and respirators used, the contents of the section, the identity of the competent person, and the purpose and description of medical surveillance.

Key takeaways

  • 1926.1153(i)(2)(i) is part of OSHA's construction standards (29 CFR Part 1926, Subpart Z).
  • OSHA cited it 322 times in the last 3 years, in 311 inspections, with $196,283 in current penalties.
  • Most citations: MI (44), CT (38), IL (29).
  • Related part: 1926.1153(i) Communication of respirable crystalline silica hazards to employees (506 citations).
  • Free 5-minute toolbox talk for your crew below.
322citations, 3 years
$196,283current penalties
311inspections
0linked injury cases
In this article
  1. What this rule covers
  2. Official text
  3. Where and how often it was cited
  4. Free toolbox talk
  5. OSHA interpretation letters
  6. Related parts of this rule
  7. Get your crew competent
  8. Frequently asked questions
  9. About this page

What this rule covers

29 CFR 1926.1153(i)(2)(i) is one requirement inside 1926.1153 Respirable crystalline silica, an OSHA construction standard (Part 1926, Subpart Z). It includes 6 sub-paragraphs. The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(i) The employer shall ensure that each employee covered by this section can demonstrate knowledge and understanding of at least the following: 322 citations

(A) The health hazards associated with exposure to respirable crystalline silica; Open (i)(2)(i)(a) 22 citations

(B) Specific tasks in the workplace that could result in exposure to respirable crystalline silica; 5 citations

(C) Specific measures the employer has implemented to protect employees from exposure to respirable crystalline silica, including engineering controls, work practices, and respirators to be used; Open (i)(2)(i)(c) 11 citations

(D) The contents of this section; 5 citations

(E) The identity of the competent person designated by the employer in accordance with paragraph (g)(4) of this section; and 2 citations

(F) The purpose and a description of the medical surveillance program required by paragraph (h) of this section. Open (i)(2)(i)(f)

Source: eCFR, text current as of 2026-10-15. Read all of 1926.1153.

Where and how often it was cited

YearCitations
202320
2024123
202598
202681

Top states: MI (44), CT (38), IL (29), OH (24), KY (22)

Largest penalties

EmployerLocationPenalty for this rule
THOMAS BUILDERS OF VIRGINIA, INC.ROANOKE, VA$8,260
COW-BAY SPRINKLER CORP.MOHEGAN LAKE, NY$8,067
HOSKINSON CONTRACTINGGILLETTE, WY$6,641
155494 - CAROLINA CONDUIT SYSTEMS, INC.ASHEVILLE, NC$6,540
68958 - PENSKE TRUCK LEASING CO LP OF KENTUCKYERLANGER, KY$6,300

Free toolbox talk

A 5-minute crew talk on 1926.1153(i)(2)(i), plus alerts when this rule changes. Free.




OSHA interpretation letters

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

Is sitting through training enough?

No. Each employee must be able to demonstrate knowledge and understanding of the listed topics.

Does training include protective measures?

Yes. Specific measures the employer uses, including engineering controls, work practices and respirators.

Does training cover medical surveillance?

Yes. Its purpose and a description of the program.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top