29 CFR 1926 · Construction · Subpart CC

1926.1412(f)(1): Annual Crane Inspection

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated October 19, 2026 3 min read

In plain words:

Cranes and derricks must be inspected at least every 12 months by a qualified person following the each-shift inspection items in paragraph (d). The corrective action rules in paragraphs (f)(4) through (f)(6) apply instead of those in paragraphs (d)(2) and (d)(3).

Key takeaways

  • 1926.1412(f)(1) is part of OSHA's construction standards (29 CFR Part 1926, Subpart CC).
  • OSHA cited it 57 times in the last 3 years, in 57 inspections, with $122,040 in current penalties.
  • Most citations: GA (12), MI (10), NC (6).
  • Related part: 1926.1412(f) Annual/comprehensive (79 citations).
  • Free 5-minute toolbox talk for your crew below.
57citations, 3 years
$122,040current penalties
57inspections
0linked injury cases
In this article
  1. What this rule covers
  2. Official text
  3. Where and how often it was cited
  4. Free toolbox talk
  5. OSHA interpretation letters
  6. Related parts of this rule
  7. Get your crew competent
  8. Frequently asked questions
  9. About this page

What this rule covers

29 CFR 1926.1412(f)(1) is one requirement inside 1926.1412 Inspections, an OSHA construction standard (Part 1926, Subpart CC). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(1) At least every 12 months the equipment must be inspected by a qualified person in accordance with paragraph (d) of this section (each shift) except that the corrective action set forth in paragraphs (f)(4), (f)(5), and (f)(6) of this section must apply in place of the corrective action required by paragraphs (d)(2) and (d)(3) of this section. 57 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1926.1412.

Where and how often it was cited

YearCitations
20237
202417
202521
202612

Top states: GA (12), MI (10), NC (6), SD (5), FL (4)

Largest penalties

EmployerLocationPenalty for this rule
GRANGAARD CONSTRUCTION, INCMENNO, SD$16,550
GPPC INC.SAIPAN, MP$14,895
RZM CONSTRUCTION INC.LAWRENCEVILLE, GA$11,823
RIGOBERTO ZETINAFLOWERY BRANCH, GA$11,823
RIGOBERTO ZETINAHOSCHTON, GA$11,524

Free toolbox talk

A 5-minute crew talk on 1926.1412(f)(1), plus alerts when this rule changes. Free.




OSHA interpretation letters

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

How often is the annual crane inspection required?

At least every 12 months.

Who must do the annual inspection?

A qualified person.

What does the inspection cover?

It is done in accordance with paragraph (d), with corrective action under paragraphs (f)(4), (f)(5) and (f)(6).

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top