29 CFR 1926 · Construction · Subpart I

1926.300(a): Keep Hand and Power Tools Safe

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated October 19, 2026 3 min read

In plain words:

All hand and power tools and similar equipment must be maintained in a safe condition, whether furnished by the employer or the employee.

Key takeaways

  • 1926.300(a) is part of OSHA's construction standards (29 CFR Part 1926, Subpart I).
  • OSHA cited it 73 times in the last 3 years, in 73 inspections, with $101,428 in current penalties.
  • 1 death is linked to inspections that cited this rule.
  • Most citations: MD (43), VA (7), PR (4).
  • Free 5-minute toolbox talk for your crew below.
73citations, 3 years
$101,428current penalties
73inspections
1linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Get your crew competent
  8. Frequently asked questions
  9. About this page

What this rule covers

29 CFR 1926.300(a) ("Condition of tools") is one requirement inside 1926.300 General requirements, an OSHA construction standard (Part 1926, Subpart I). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(a) Condition of tools. All hand and power tools and similar equipment, whether furnished by the employer or the employee, shall be maintained in a safe condition. 73 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1926.300.

Injuries linked to this rule

1 death is linked to inspections where OSHA cited 1926.300(a).

Employee dies from head and neck trauma in fall from ladder
2024-12-13 · Fatal · CAMBRIDGE, MD

At 11:06 a.m. on December 13, 2024, an employee working as a construction laborer for a roofing contractor was installing shingles on a decorative eye brow roof. The employee was working from a height of 27 feet from a Werner 40-foot aluminum extension ladder. A…

Where and how often it was cited

YearCitations
20234
202423
202532
202614

Top states: MD (43), VA (7), PR (4), HI (3), NY (2)

Largest penalties

EmployerLocationPenalty for this rule
ALVAREZ GENERAL CONSTRUCTION CORP.FLUSHING, NY$15,625
C3 ENVIRONMENTAL SPECIALITIESRIO MEDINA, TX$6,809
BRIAN CONSTRUCTION, INC.RICHMOND, RI$6,452
SAGEWATER LLCHONOLULU, HI$6,332
C & W CONTRATISTAS CORPASTORIA, NY$6,250

Free toolbox talk

A 5-minute crew talk on 1926.300(a), plus alerts when this rule changes. Free.




OSHA interpretation letters

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

Does this cover tools I bring from home?

Yes. It applies whether the tools are furnished by the employer or the employee.

What must be done with tools?

They must be maintained in a safe condition.

Does it cover both hand and power tools?

Yes. It covers all hand and power tools and similar equipment.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top