29 CFR 1926 · Construction · Subpart I

1926.302(b)(3): Safety Devices on Pneumatic Nailers and Staplers

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated November 17, 2026 3 min read

In plain words:

Employers must make sure pneumatic nailers, staplers and similar tools with automatic fastener feed that operate at more than 100 p.s.i. at the tool have a muzzle safety device. The device must keep the tool from ejecting fasteners unless the muzzle is in contact with the work surface.

Key takeaways

  • 1926.302(b)(3) is part of OSHA's construction standards (29 CFR Part 1926, Subpart I).
  • OSHA cited it 104 times in the last 3 years, in 104 inspections, with $129,192 in current penalties.
  • 1 death is linked to inspections that cited this rule.
  • Most citations: MD (96), NC (5), GA (1).
  • Related part: 1926.302(b) Pneumatic power tools (124 citations).
  • Free 5-minute toolbox talk for your crew below.

Get the free 5-minute toolbox talk on 1926.302(b)(3) ↓

104citations, 3 years
$129,192current penalties
104inspections
1linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Related parts of this rule
  8. Get your crew competent
  9. Frequently asked questions
  10. About this page

What this rule covers

29 CFR 1926.302(b)(3) is one requirement inside 1926.302 Power-operated hand tools, an OSHA construction standard (Part 1926, Subpart I). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(3) All pneumatically driven nailers, staplers, and other similar equipment provided with automatic fastener feed, which operate at more than 100 p.s.i. pressure at the tool shall have a safety device on the muzzle to prevent the tool from ejecting fasteners, unless the muzzle is in contact with the work surface. 104 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1926.302.

See every company cited for this rule.

Export the list: 104 inspections cited 1926.302(b)(3) in the last 3 years, with employer, location, penalty and date.

Purple Belt, $59/mo

Injuries linked to this rule

1 death is linked to inspections where OSHA cited 1926.302(b)(3).

Employee dies from head and neck trauma in fall from ladder
2024-12-13 · Fatal · CAMBRIDGE, MD

At 11:06 a.m. on December 13, 2024, an employee working as a construction laborer for a roofing contractor was installing shingles on a decorative eye brow roof. The employee was working from a height of 27 feet from a Werner 40-foot aluminum extension ladder. A…

Where and how often it was cited

YearCitations
20232
202429
202552
202621

Top states: MD (96), NC (5), GA (1), CO (1), NY (1)

Largest penalties

EmployerLocationPenalty for this rule
WANCL FRAMING & CONTRACTOR LLCITHACA, NY$5,958
ODI CONSTRUCTION, LIMITED LIABILITY COMPANYWOODSBORO, MD$4,800
JOSE VIDAL CRUZ SARAVIAUPPER MARLBORO, MD$4,800
JSA SIDING LLCARVADA, CO$4,256
ODI CONSTRUCTION, LIMITED LIABILITY COMPANYFREDERICK, MD$4,000

Free toolbox talk

A 5-minute crew talk on 1926.302(b)(3), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1926.302(b)(3).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

Which tools need a muzzle safety device?

Pneumatically driven nailers, staplers and similar equipment with automatic fastener feed that operate at more than 100 p.s.i. pressure at the tool.

What does the safety device do?

It prevents the tool from ejecting fasteners unless the muzzle is in contact with the work surface.

Where is the pressure measured?

At the tool.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top