1926.451(a)(2): OSHA rule
Key takeaways
- 1926.451(a)(2) is part of OSHA's construction standards (29 CFR Part 1926, Subpart L).
- OSHA cited it 1 times in the last 3 years, in 1 inspections, with $3,724 in current penalties.
- Related part: 1926.451(a) Capacity (257 citations).
- Free 5-minute toolbox talk for your crew below.
In this article
What this rule covers
29 CFR 1926.451(a)(2) is one requirement inside 1926.451 General requirements, an OSHA construction standard (Part 1926, Subpart L). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.
Official text
(2) Direct connections to roofs and floors, and counterweights used to balance adjustable suspension scaffolds, shall be capable of resisting at least 4 times the tipping moment imposed by the scaffold operating at the rated load of the hoist, or 1.5 (minimum) times the tipping moment imposed by the scaffold operating at the stall load of the hoist, whichever is greater. 1 citations
Source: eCFR, text current as of 2026-10-15. Read all of 1926.451.
Where and how often it was cited
Free toolbox talk
A 5-minute crew talk on 1926.451(a)(2), plus alerts when this rule changes. Free.
OSHA interpretation letters
- Tie-in requirements for supported scaffolds; errors in Non-Mandatory Appendix E. (2005-04-08)
- Use of roof top rolling outriggers used for swinging scaffolds. (1982-05-05)
Related parts of this rule
- 1926.451(a) Capacity 257 citations
- 1926.451(a)(6) 186 citations
- 1926.451(a)(1) 70 citations
- 1926.451(a)(3)
- 1926.451(a)(4)
- 1926.451(a)(5)
Get your crew competent
Trainers on Black Belt Safety: Marc Harvey, Dana Reyes
Trainers and suppliers: feature your business on this rule for $25/month.
About this page
Sources
- 29 CFR 1926.451 (eCFR), text current as of 2026-10-15
- U.S. Department of Labor enforcement data: OSHA inspections, citations and accident records, copied nightly; data as of 2026-10-20
3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.