29 CFR 1926 · Construction · Subpart L

1926.451(c)(2)(v): Forklifts Supporting Scaffold Platforms

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated October 19, 2026 3 min read

In plain words:

Employers must not use forklifts to support scaffold platforms unless the entire platform is attached to the fork and the forklift is not moved horizontally while the platform is occupied.

Key takeaways

  • 1926.451(c)(2)(v) is part of OSHA's construction standards (29 CFR Part 1926, Subpart L).
  • OSHA cited it 225 times in the last 3 years, in 224 inspections, with $800,106 in current penalties.
  • 2 deaths are linked to inspections that cited this rule.
  • Most citations: IL (27), TX (21), OH (17).
  • Related part: 1926.451(c) Criteria for supported scaffolds (1,296 citations).
  • Free 5-minute toolbox talk for your crew below.
225citations, 3 years
$800,106current penalties
224inspections
2linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Related parts of this rule
  8. Get your crew competent
  9. Frequently asked questions
  10. About this page

What this rule covers

29 CFR 1926.451(c)(2)(v) is one requirement inside 1926.451 General requirements, an OSHA construction standard (Part 1926, Subpart L). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(v) Fork-lifts shall not be used to support scaffold platforms unless the entire platform is attached to the fork and the fork-lift is not moved horizontally while the platform is occupied. 225 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1926.451.

Injuries linked to this rule

2 deaths are linked to inspections where OSHA cited 1926.451(c)(2)(v).

Employee falls from forklift forks while installing window,
2023-12-04 · Fatal · BUCKEYE LAKE, OH

At 2:30 p.m. on December 4, 2023, Employee # 1 was working for a residential general contractor. Employee #1 was installing a window. Employee #1 was standing with the window on an scaffold platform which was comprised of a 41 inch by 48 inch sheet…

See all 2 cases

Full case list with employer, penalty, filters and download is part of OSHA Data (Purple Belt).

Unlock with Purple Belt

Where and how often it was cited

YearCitations
202324
202494
202566
202641

Top states: IL (27), TX (21), OH (17), SD (16), NE (16)

Largest penalties

EmployerLocationPenalty for this rule
ROAD CONTRACTOR CORPORATIONWILLIAMSTOWN, NJ$70,982
MILLER CARPENTRY, LLCMAHOMET, IL$34,048
ACE II LLCBELMAR, NJ$32,265
DANNY MILLERMAHOMET, IL$30,420
DANNY MILLERCHAMPAIGN, IL$29,465

Free toolbox talk

A 5-minute crew talk on 1926.451(c)(2)(v), plus alerts when this rule changes. Free.




OSHA interpretation letters

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

Can a forklift hold up a scaffold platform?

Only if the entire platform is attached to the fork.

Can the forklift drive while workers are on the platform?

No. The forklift may not be moved horizontally while the platform is occupied.

Is a platform resting loose on the forks allowed?

No. The entire platform must be attached to the fork.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top