1926.555(a): General requirements
Key takeaways
- 1926.555(a) is part of OSHA's construction standards (29 CFR Part 1926, Subpart N).
- OSHA cited it 9 times in the last 3 years, in 7 inspections, with $60,653 in current penalties.
- Related part: 1926.555(a)(8) (1 citations).
- Free 5-minute toolbox talk for your crew below.
In this article
What this rule covers
29 CFR 1926.555(a) ("General requirements") is one requirement inside 1926.555 Conveyors, an OSHA construction standard (Part 1926, Subpart N). It includes 8 sub-paragraphs. The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.
Official text
(a) General requirements. 9 citations
(1) Means for stopping the motor or engine shall be provided at the operator's station. Conveyor systems shall be equipped with an audible warning signal to be sounded immediately before starting up the conveyor. 1 citations
(2) If the operator's station is at a remote point, similar provisions for stopping the motor or engine shall be provided at the motor or engine location. 1 citations
(3) Emergency stop switches shall be arranged so that the conveyor cannot be started again until the actuating stop switch has been reset to running or “on” position.
(4) Screw conveyors shall be guarded to prevent employee contact with turning flights.
(5) Where a conveyor passes over work areas, aisles, or thoroughfares, suitable guards shall be provided to protect employees required to work below the conveyors. 1 citations
(6) All crossovers, aisles, and passageways shall be conspicuously marked by suitable signs, as required by subpart G of this part.
(7) Conveyors shall be locked out or otherwise rendered inoperable, and tagged out with a “Do Not Operate” tag during repairs and when operation is hazardous to employees performing maintenance work. 5 citations
(8) All conveyors in use shall meet the applicable requirements for design, construction, inspection, testing, maintenance, and operation, as prescribed in the ANSI B20.1-1957, Safety Code for Conveyors, Cableways, and Related Equipment. Open (a)(8) 1 citations
Source: eCFR, text current as of 2026-10-15. Read all of 1926.555.
Where and how often it was cited
Free toolbox talk
A 5-minute crew talk on 1926.555(a), plus alerts when this rule changes. Free.
OSHA interpretation letters
Related parts of this rule
- 1926.555(a)(8) 1 citations
Get your crew competent
Trainers on Black Belt Safety: Marc Harvey, Dana Reyes
Trainers and suppliers: feature your business on this rule for $25/month.
About this page
Sources
- 29 CFR 1926.555 (eCFR), text current as of 2026-10-15
- U.S. Department of Labor enforcement data: OSHA inspections, citations and accident records, copied nightly; data as of 2026-10-20
3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.