1926.62(j)(2): Biological monitoring
Key takeaways
- 1926.62(j)(2) is part of OSHA's construction standards (29 CFR Part 1926, Subpart D).
- OSHA cited it 2 times in the last 3 years, in 2 inspections, with $3,000 in current penalties.
- Related part: 1926.62(j) Medical surveillance (15 citations).
- Free 5-minute toolbox talk for your crew below.
In this article
What this rule covers
29 CFR 1926.62(j)(2) ("Biological monitoring") is one requirement inside 1926.62 Lead, an OSHA construction standard (Part 1926, Subpart D). It includes 9 sub-paragraphs. The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.
Official text
(2) Biological monitoring — 2 citations
(i) Blood lead and ZPP level sampling and analysis. The employer shall make available biological monitoring in the form of blood sampling and analysis for lead and zinc protoporphyrin levels to each employee covered under paragraphs (j)(1)(i) and (ii) of this section on the following schedule: 1 citations
(A) For each employee covered under paragraph (j)(1)(ii) of this section, at least every 2 months for the first 6 months and every 6 months thereafter;
(B) For each employee covered under paragraphs (j)(1) (i) or (ii) of this section whose last blood sampling and analysis indicated a blood lead level at or above 40 µg/dl, at least every two months. This frequency shall continue until two consecutive blood samples and analyses indicate a blood lead level below 40 µg/dl; and
(C) For each employee who is removed from exposure to lead due to an elevated blood lead level at least monthly during the removal period.
(ii) Follow-up blood sampling tests. Whenever the results of a blood lead level test indicate that an employee's blood lead level is at or above the numerical criterion for medical removal under paragraph (k)(1)(i) of this section, the employer shall provide a second (follow-up) blood sampling test within two weeks after the employer receives the results of the first blood sampling test.
(iii) Accuracy of blood lead level sampling and analysis. Blood lead level sampling and analysis provided pursuant to this section shall have an accuracy (to a confidence level of 95 percent) within plus or minus 15 percent or 6 µg/dl, whichever is greater, and shall be conducted by a laboratory approved by OSHA. Open (j)(2)(iii)
(iv) Employee notification.
(A) Within five working days after the receipt of biological monitoring results, the employer shall notify each employee in writing of his or her blood lead level; and
(B) The employer shall notify each employee whose blood lead level is at or above 40 µg/dl that the standard requires temporary medical removal with Medical Removal Protection benefits when an employee's blood lead level is at or above the numerical criterion for medical removal under paragraph (k)(1)(i) of this section.
Source: eCFR, text current as of 2026-10-15. Read all of 1926.62.
Where and how often it was cited
Free toolbox talk
A 5-minute crew talk on 1926.62(j)(2), plus alerts when this rule changes. Free.
OSHA interpretation letters
Related parts of this rule
- 1926.62(j) Medical surveillance 15 citations
- 1926.62(j)(1)(i) 12 citations
- 1926.62(j)(1) General 12 citations
- 1926.62(j)(2)(iii) Accuracy of blood lead level sampling and analysis
Get your crew competent
Trainers on Black Belt Safety: Marc Harvey, Dana Reyes
Trainers and suppliers: feature your business on this rule for $25/month.
About this page
Sources
- 29 CFR 1926.62 (eCFR), text current as of 2026-10-15
- U.S. Department of Labor enforcement data: OSHA inspections, citations and accident records, copied nightly; data as of 2026-10-20
3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.
