1926.800(a): Scope and application
Key takeaways
- 1926.800(a) is part of OSHA's construction standards (29 CFR Part 1926, Subpart S).
- Related part: 1926.800(a)(1).
- Free 5-minute toolbox talk for your crew below.
Get the free 5-minute toolbox talk on 1926.800(a) ↓
In this article
What this rule covers
29 CFR 1926.800(a) ("Scope and application") is one requirement inside 1926.800 Underground construction, an OSHA construction standard (Part 1926, Subpart S). It includes 4 sub-paragraphs. The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.
Official text
(a) Scope and application.
(1) This section applies to the construction of underground tunnels, shafts, chambers, and passageways. This section also applies to cut-and-cover excavations which are both physically connected to ongoing underground construction operations within the scope of this section, and covered in such a manner as to create conditions characteristic of underground construction. Open (a)(1)
(2) This section does not apply to the following:
(i) Excavation and trenching operations covered by subpart P of this part, such as foundation operations for above-ground structures that are not physically connected to underground construction operations, and surface excavation; nor
(ii) Underground electrical transmission and distribution lines, as addressed in subpart V of this part.
Source: eCFR, text current as of 2026-10-15. Read all of 1926.800.
Free toolbox talk
A 5-minute crew talk on 1926.800(a), plus alerts when this rule changes. Free.
OSHA interpretation letters
None exist. OSHA has not published a letter of interpretation for 1926.800(a).
Related parts of this rule
Get your crew competent
Trainers on Black Belt Safety: Marc Harvey
Trainers and suppliers: feature your business on this rule for $25/month.
About this page
Sources
- 29 CFR 1926.800 (eCFR), text current as of 2026-10-15
- U.S. Department of Labor enforcement data: OSHA inspections, citations and accident records, copied nightly
3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.
