- 1 Section
- 1 Lesson
Spray Finishing with Flammable and Combustible Materials
For spray painters, powder coaters and supervisors: spray booth basics, keeping ignition sources away, ventilation, filters and residue disposal, hoses and grounding, cleaning solvents, no-smoking rules, and electrostatic and powder coating safety.
This certificate records completion of awareness training based on OSHA 29 CFR 1910.107. It is not an OSHA card or license. 29 CFR 1910.107 has no training requirement of its own. Your employer must still keep spraying within predetermined spraying areas, maintain the spray booths, ventilation, electrical equipment, grounding and residue disposal as 1910.107 requires, and post “No smoking” signs at all spraying areas and paint storage rooms. Training that other OSHA standards require for your job, such as respiratory protection or hazard communication, is separate.
Want to submit a review? Login and enrolled
What you will learn
- Keep ignition sources out of and away from spraying areas
- Run ventilation correctly during and after spraying
- Handle filters, residue, rags and cleaning solvents safely
- Ground containers and equipment, and inspect hoses
- Apply electrostatic and powder coating rules
Course outline
- Booths, ignition and ventilation: The booth and ignition sources; Ventilation
- Operations and maintenance: Filters, residue, rags and solvents; Hoses, grounding and no smoking
- Electrostatic and powder coating: Electrostatic and powder coating
- On the job
Course facts
- Who it is for: Spray-painter, Powder-coater, Supervisor
- Time: about 25 minutes, on your phone or computer
- Final quiz pass mark: 80%, with a certificate employers can verify
- Based on OSHA 29 CFR 1910.107
Part of The Dojo — OSHA Safety Training Academy
Included from Blue Belt up ($25/month), with every other course in the Dojo.
Get your Blue BeltCompare beltsRead the free guide — what the rule requires, in plain words.
