Walking-Working Surfaces and Fall Hazards for General Industry Workers

Walking-Working Surfaces and Fall Hazards for General Industry Workers
Overview
Curriculum
  • 6 modules
  • 15 pages
  • about 20 minutes
Expand All
Walking-Working Surfaces and Fall Hazards for General Industry Workers
1 Lesson

For general industry workers: spot and report surface hazards, recognize edges, holes and equipment that need fall protection, check guardrails and covers, and use dockboards safely.

What this certificate covers

This certificate records completion of awareness training based on OSHA 29 CFR 1910 Subpart D. It is not an OSHA card or license, and it does not by itself meet the training requirements of 29 CFR 1910.30. Your employer must still provide, as applicable, fall hazard training by a qualified person covering the fall hazards in your work area, training in the proper care, inspection, storage and use of the equipment you use (including placing and securing dockboards), and retraining when required.

What you will learn

  • Spot and report slip, trip and surface hazards
  • Recognize edges, holes and dangerous equipment that call for fall protection
  • Check that guardrails and hole covers are doing their job
  • Use a dockboard safely

What you get

  • About 20 minutes, on your phone or computer, read out loud as you go
  • 1 short real-footage video showing it done right
  • Real photos, not cartoons
  • A hands-on drill: you make the calls, step by step, and see what happens
  • 5 quick checks along the way, then a final quiz
  • A certificate with a QR code your employer can check online
  • A wallet card you can print and carry
  • A printable study guide (PDF)
  • A hands-on checklist your supervisor signs off (PDF)

Training a crew? Add your workers, see who finished, and keep every certificate in one place. Train your team →

Course highlights

Short previews of what this course covers, with the course narration. Press play.

You walk and work on floors, platforms, docks and mezzanines
Welcome · 49 s
Fell from the open edge
Real case: the open mezzanine edge · 75 s
Edges, holes and dangerous equipment
Recognize fall hazards · 77 s

Course outline

  1. Real case: the open mezzanine edge: Fell from the open edge
  2. Spot and report surface hazards
  3. Recognize fall hazards: Edges, holes and dangerous equipment
  4. Check guardrails and covers
  5. Use dockboards safely
  6. On the job

Questions

What does Walking-Working Surfaces and Fall Hazards for General Industry Workers cover?

You will be able to: spot and report slip, trip and surface hazards; recognize edges, holes and dangerous equipment that call for fall protection; check that guardrails and hole covers are doing their job; use a dockboard safely.

Who is this course for?

It is written for workers.

How long does it take?

About 20 minutes, on a phone or a computer. You can stop and pick up where you left off.

Do I get a certificate?

Yes. Score 80% or better on the final quiz and you get a certificate with a code your employer can check.

Which OSHA rule is it based on?

Based on OSHA 29 CFR 1910 Subpart D (1910.22, 1910.26, 1910.28, 1910.29, 1910.30), general industry. It is awareness training: it is not an OSHA card, and your employer still has to train you on their own equipment and plan.

Course facts

Get this course and every other one

Part of The Dojo — OSHA Safety Training Academy

Included from Blue Belt up ($25/month), with every other course in the Dojo.

Get your Blue BeltCompare belts
Deleting Course Review
Are you sure? You can't restore this back
Course Access

This course is password protected. To access it please enter your password below:

Related Courses

Scroll to top