Walking-Working Surfaces and Fall Hazards for General Industry Workers
- 5 modules
- 13 pages
- about 20 minutes
For general industry workers: spot and report surface hazards, recognize edges, holes and equipment that need fall protection, check guardrails and covers, and use dockboards safely.
What this certificate covers
This certificate records completion of awareness training based on OSHA 29 CFR 1910 Subpart D. It is not an OSHA card or license, and it does not by itself meet the training requirements of 29 CFR 1910.30. Your employer must still provide, as applicable, fall hazard training by a qualified person covering the fall hazards in your work area, training in the proper care, inspection, storage and use of the equipment you use (including placing and securing dockboards), and retraining when required.
¿Quieres enviar una reseña? Acceso y se matriculó
What you will learn
- Spot and report slip, trip and surface hazards
- Recognize edges, holes and dangerous equipment that call for fall protection
- Check that guardrails and hole covers are doing their job
- Use a dockboard safely
What you get
- About 20 minutes, on your phone or computer, read out loud as you go
- Real photos, not cartoons
- A hands-on drill: you make the calls, step by step, and see what happens
- 4 quick checks along the way, then a final quiz
- A certificate with a QR code your employer can check online
- A wallet card you can print and carry
- A printable study guide (PDF)
Training a crew? Add your workers, see who finished, and keep every certificate in one place. Train your team →
Course outline
- Spot and report surface hazards: Clean, dry, sound and inspected
- Recognize fall hazards: Edges, holes and dangerous equipment
- Check guardrails and covers: Is it doing its job?
- Use dockboards safely: Secure the board, secure the trailer
- On the job
Questions
What does Walking-Working Surfaces and Fall Hazards for General Industry Workers cover?
You will be able to: spot and report slip, trip and surface hazards; recognize edges, holes and dangerous equipment that call for fall protection; check that guardrails and hole covers are doing their job; use a dockboard safely.
Who is this course for?
It is written for workers.
How long does it take?
About 20 minutes, on a phone or a computer. You can stop and pick up where you left off.
Do I get a certificate?
Yes. Score 80% or better on the final quiz and you get a certificate with a code your employer can check.
Which OSHA rule is it based on?
Based on OSHA 29 CFR 1910 Subpart D (1910.22, 1910.26, 1910.28, 1910.29, 1910.30), general industry. It is awareness training: it is not an OSHA card, and your employer still has to train you on their own equipment and plan.
Course facts
- Who it is for: Workers
- Trainer: Marc Harvey, Site Safety Officer (OSHA 30, CPR, USACE CQM)
- Time: about 20 minutes, on your phone or computer
- Final quiz pass mark: 80%, with a certificate employers can verify
- Based on OSHA 29 CFR 1910 Subpart D (1910.22, 1910.26, 1910.28, 1910.29, 1910.30), general industry (official text)
- Printable study guide (PDF) with the key points and practice questions, included with the course
- Answer key with OSHA citations for trainers (trainer plans)
Facts checked word for word against the official text (1 sources)
29 CFR 1910 Subpart D
Parte de The Dojo — Academia de Capacitación en Seguridad de OSHA
Included from Blue Belt up ($25/month), with every other course in the Dojo.
¡Consigue tu cinturón azul!Comparar cinturonesLea la guía gratuita — lo que exige la norma, en palabras sencillas.
