Hand and Power Tool Safety for Workers

Última actualización: octubre 5, 2026

6 modules
17 pages
about 20 minutes

Expandir todo

Hand and Power Tool Safety for Workers

Lección 1

Curso interactivo

For the worker who uses hand and power tools: spot a tool that is unsafe to use, check guards and switches, use electric and air tools the right way, mount and use grinding wheels safely, and know the limits on powder-actuated tools.

What this certificate covers

This certificate records completion of awareness training based on OSHA 29 CFR 1926.300, 1926.301, 1926.302, 1926.303 and 1926.304 (construction) and 29 CFR 1910.242 and 1910.243 (general industry). It is not an OSHA card or license, and it does not by itself meet the training requirement of 29 CFR 1926.302(e)(1). Your employer must still make sure that only employees who have been trained in the operation of the particular powder-actuated tool in use are allowed to operate it. The general industry sections taught (1910.242 and 1910.243) have no training requirement; there the employer remains responsible for the safe condition of tools and equipment used by employees, including tools and equipment furnished by employees (1910.242(a)).

What you will learn

Recognize a hand or power tool that is not in safe condition and keep it out of use
Check that guards and switches are in place and working before you use a power tool
Use electric and air-powered tools and compressed air the right way
Mount and use grinding wheels safely
Know the limits on powder-actuated tools

What you get

About 20 minutes, on your phone or computer, read out loud as you go
Real photos, not cartoons
A hands-on drill: you make the calls, step by step, and see what happens
5 quick checks along the way, then a final quiz
A certificate with a QR code your employer can check online
A wallet card you can print and carry
A printable study guide (PDF)

Training a crew? Add your workers, see who finished, and keep every certificate in one place. Train your team →

Course outline

Safe condition: Unsafe tools stay out of use
Guards and switches: Guards stay on; Switches: what should happen when you let go
Electric and air tools: Electric tools; Air tools and compressed air
Grinding wheels: Before and during grinding
Powder-actuated tools: Trained operators only
On the job

Questions

What does Hand and Power Tool Safety for Workers cover?

You will be able to: recognize a hand or power tool that is not in safe condition and keep it out of use; check that guards and switches are in place and working before you use a power tool; use electric and air-powered tools and compressed air the right way; mount and use grinding wheels safely; know the limits on powder-actuated tools.

Who is this course for?

It is written for workers.

How long does it take?

About 20 minutes, on a phone or a computer. You can stop and pick up where you left off.

Do I get a certificate?

Yes. Score 80% or better on the final quiz and you get a certificate with a code your employer can check.

Which OSHA rule is it based on?

Based on OSHA 29 CFR 1926.300–1926.304 (construction) and 29 CFR 1910.242–1910.243 (general industry). It is awareness training: it is not an OSHA card, and your employer still has to train you on their own equipment and plan.

Course facts

Who it is for: Workers
Trainer: Marc Harvey, Site Safety Officer (OSHA 30, CPR, USACE CQM)
Time: about 20 minutes, on your phone or computer
Final quiz pass mark: 80%, with a certificate employers can verify
Based on OSHA 29 CFR 1926.300–1926.304 (construction) and 29 CFR 1910.242–1910.243 (general industry) (official text)
Printable study guide (PDF) with the key points and practice questions, included with the course
Answer key with OSHA citations for trainers (trainer plans)
Facts checked word for word against the official text (2 sources)
29 CFR 1926 Subpart I; 29 CFR 1910 Subpart P